module ENTITY-MIB {
yang-version 1;
namespace
"urn:ietf:params:xml:ns:yang:smiv2:ENTITY-MIB";
prefix entity-mib;
import SNMP-FRAMEWORK-MIB {
prefix snmp-framework;
}
import SNMPv2-TC {
prefix smiv2;
}
import yang-smi {
prefix smi;
}
import ietf-yang-types {
prefix yang;
}
organization "IETF ENTMIB Working Group";
contact
" WG E-mail: entmib@ietf.org
Mailing list subscription info:
http://www.ietf.org/mailman/listinfo/entmib
Andy Bierman
ietf@andybierman.com
Keith McCloghrie
Cisco Systems Inc.
170 West Tasman Drive
San Jose, CA 95134
+1 408-526-5260
kzm@cisco.com";
description
"The MIB module for representing multiple logical
entities supported by a single SNMP agent.
Copyright (C) The Internet Society (2005). This
version of this MIB module is part of RFC 4133; see
the RFC itself for full legal notices.";
revision "2005-08-10" {
description
"Initial Version of Entity MIB (Version 3).
This revision obsoletes RFC 2737.
Additions:
- cpu(12) enumeration added to PhysicalClass TC
- DISPLAY-HINT clause to PhysicalIndex TC
- PhysicalIndexOrZero TC
- entPhysicalMfgDate object
- entPhysicalUris object
Changes:
- entPhysicalContainedIn SYNTAX changed from
INTEGER to PhysicalIndexOrZero
This version published as RFC 4133.";
}
revision "1999-12-07" {
description
"Initial Version of Entity MIB (Version 2).
This revision obsoletes RFC 2037.
This version published as RFC 2737.";
}
revision "1996-10-31" {
description
"Initial version (version 1), published as
RFC 2037.";
}
typedef PhysicalIndex {
type int32 {
smi:display-hint "d";
range "1..2147483647";
}
description
"An arbitrary value that uniquely identifies the physical
entity. The value should be a small, positive integer.
Index values for different physical entities are not
necessarily contiguous.";
}
typedef PhysicalIndexOrZero {
type int32 {
smi:display-hint "d";
range "0..2147483647";
}
description
"This textual convention is an extension of the
PhysicalIndex convention, which defines a greater than zero
value used to identify a physical entity. This extension
permits the additional value of zero. The semantics of the
value zero are object-specific and must, therefore, be
defined as part of the description of any object that uses
this syntax. Examples of the usage of this extension are
situations where none or all physical entities need to be
referenced.";
}
typedef PhysicalClass {
type enumeration {
enum "other" {
value 1;
}
enum "unknown" {
value 2;
}
enum "chassis" {
value 3;
}
enum "backplane" {
value 4;
}
enum "container" {
value 5;
}
enum "powerSupply" {
value 6;
}
enum "fan" {
value 7;
}
enum "sensor" {
value 8;
}
enum "module" {
value 9;
}
enum "port" {
value 10;
}
enum "stack" {
value 11;
}
enum "cpu" {
value 12;
}
}
description
"An enumerated value which provides an indication of the
general hardware type of a particular physical entity.
There are no restrictions as to the number of
entPhysicalEntries of each entPhysicalClass, which must be
instantiated by an agent.
The enumeration 'other' is applicable if the physical entity
class is known, but does not match any of the supported
values.
The enumeration 'unknown' is applicable if the physical
entity class is unknown to the agent.
The enumeration 'chassis' is applicable if the physical
entity class is an overall container for networking
equipment. Any class of physical entity, except a stack,
may be contained within a chassis; and a chassis may only
be contained within a stack.
The enumeration 'backplane' is applicable if the physical
entity class is some sort of device for aggregating and
forwarding networking traffic, such as a shared backplane in
a modular ethernet switch. Note that an agent may model a
backplane as a single physical entity, which is actually
implemented as multiple discrete physical components (within
a chassis or stack).
The enumeration 'container' is applicable if the physical
entity class is capable of containing one or more removable
physical entities, possibly of different types. For
example, each (empty or full) slot in a chassis will be
modeled as a container. Note that all removable physical
entities should be modeled within a container entity, such
as field-replaceable modules, fans, or power supplies. Note
that all known containers should be modeled by the agent,
including empty containers.
The enumeration 'powerSupply' is applicable if the physical
entity class is a power-supplying component.
The enumeration 'fan' is applicable if the physical entity
class is a fan or other heat-reduction component.
The enumeration 'sensor' is applicable if the physical
entity class is some sort of sensor, such as a temperature
sensor within a router chassis.
The enumeration 'module' is applicable if the physical
entity class is some sort of self-contained sub-system. If
the enumeration 'module' is removable, then it should be
modeled within a container entity, otherwise it should be
modeled directly within another physical entity (e.g., a
chassis or another module).
The enumeration 'port' is applicable if the physical entity
class is some sort of networking port, capable of receiving
and/or transmitting networking traffic.
The enumeration 'stack' is applicable if the physical entity
class is some sort of super-container (possibly virtual),
intended to group together multiple chassis entities. A
stack may be realized by a 'virtual' cable, a real
interconnect cable, attached to multiple chassis, or may in
fact be comprised of multiple interconnect cables. A stack
should not be modeled within any other physical entities,
but a stack may be contained within another stack. Only
chassis entities should be contained within a stack.
The enumeration 'cpu' is applicable if the physical entity
class is some sort of central processing unit.";
}
typedef SnmpEngineIdOrNone {
type binary {
length "0..32";
}
description
"A specially formatted SnmpEngineID string for use with the
Entity MIB.
If an instance of an object of SYNTAX SnmpEngineIdOrNone has
a non-zero length, then the object encoding and semantics
are defined by the SnmpEngineID textual convention (see STD
62, RFC 3411 [RFC3411]).
If an instance of an object of SYNTAX SnmpEngineIdOrNone
contains a zero-length string, then no appropriate
SnmpEngineID is associated with the logical entity (i.e.,
SNMPv3 is not supported).";
}
container entityPhysical {
smi:oid "1.3.6.1.2.1.47.1.1";
list entPhysicalEntry {
smi:oid "1.3.6.1.2.1.47.1.1.1.1";
key "entPhysicalIndex";
description
"Information about a particular physical entity.
Each entry provides objects (entPhysicalDescr,
entPhysicalVendorType, and entPhysicalClass) to help an NMS
identify and characterize the entry, and objects
(entPhysicalContainedIn and entPhysicalParentRelPos) to help
an NMS relate the particular entry to other entries in this
table.";
leaf entPhysicalIndex {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.1";
type PhysicalIndex;
description
"The index for this entry.";
}
leaf entPhysicalDescr {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.2";
type snmp-framework:SnmpAdminString;
config false;
description
"A textual description of physical entity. This object
should contain a string that identifies the manufacturer's
name for the physical entity, and should be set to a
distinct value for each version or model of the physical
entity.";
}
leaf entPhysicalVendorType {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.3";
type smiv2:AutonomousType;
config false;
description
"An indication of the vendor-specific hardware type of the
physical entity. Note that this is different from the
definition of MIB-II's sysObjectID.
An agent should set this object to an enterprise-specific
registration identifier value indicating the specific
equipment type in detail. The associated instance of
entPhysicalClass is used to indicate the general type of
hardware device.
If no vendor-specific registration identifier exists for
this physical entity, or the value is unknown by this agent,
then the value { 0 0 } is returned.";
}
leaf entPhysicalContainedIn {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.4";
type PhysicalIndexOrZero;
config false;
description
"The value of entPhysicalIndex for the physical entity which
'contains' this physical entity. A value of zero indicates
this physical entity is not contained in any other physical
entity. Note that the set of 'containment' relationships
define a strict hierarchy; that is, recursion is not
allowed.
In the event that a physical entity is contained by more
than one physical entity (e.g., double-wide modules), this
object should identify the containing entity with the lowest
value of entPhysicalIndex.";
}
leaf entPhysicalClass {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.5";
type PhysicalClass;
config false;
description
"An indication of the general hardware type of the physical
entity.
An agent should set this object to the standard enumeration
value that most accurately indicates the general class of
the physical entity, or the primary class if there is more
than one entity.
If no appropriate standard registration identifier exists
for this physical entity, then the value 'other(1)' is
returned. If the value is unknown by this agent, then the
value 'unknown(2)' is returned.";
}
leaf entPhysicalParentRelPos {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.6";
type int32 {
range "-1..2147483647";
}
config false;
description
"An indication of the relative position of this 'child'
component among all its 'sibling' components. Sibling
components are defined as entPhysicalEntries that share the
same instance values of each of the entPhysicalContainedIn
and entPhysicalClass objects.
An NMS can use this object to identify the relative ordering
for all sibling components of a particular parent
(identified by the entPhysicalContainedIn instance in each
sibling entry).
If possible, this value should match any external labeling
of the physical component. For example, for a container
(e.g., card slot) labeled as 'slot #3',
entPhysicalParentRelPos should have the value '3'. Note
that the entPhysicalEntry for the module plugged in slot 3
should have an entPhysicalParentRelPos value of '1'.
If the physical position of this component does not match
any external numbering or clearly visible ordering, then
user documentation or other external reference material
should be used to determine the parent-relative position.
If this is not possible, then the agent should assign a
consistent (but possibly arbitrary) ordering to a given set
of 'sibling' components, perhaps based on internal
representation of the components.
If the agent cannot determine the parent-relative position
for some reason, or if the associated value of
entPhysicalContainedIn is '0', then the value '-1' is
returned. Otherwise, a non-negative integer is returned,
indicating the parent-relative position of this physical
entity.
Parent-relative ordering normally starts from '1' and
continues to 'N', where 'N' represents the highest
positioned child entity. However, if the physical entities
(e.g., slots) are labeled from a starting position of zero,
then the first sibling should be associated with an
entPhysicalParentRelPos value of '0'. Note that this
ordering may be sparse or dense, depending on agent
implementation.
The actual values returned are not globally meaningful, as
each 'parent' component may use different numbering
algorithms. The ordering is only meaningful among siblings
of the same parent component.
The agent should retain parent-relative position values
across reboots, either through algorithmic assignment or use
of non-volatile storage.";
}
leaf entPhysicalName {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.7";
type snmp-framework:SnmpAdminString;
config false;
description
"The textual name of the physical entity. The value of this
object should be the name of the component as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might be a text
name (e.g., `console') or a simple component number (e.g.,
port or module number, such as `1'), depending on the
physical component naming syntax of the device.
If there is no local name, or if this object is otherwise
not applicable, then this object contains a zero-length
string.
Note that the value of entPhysicalName for two physical
entities will be the same in the event that the console
interface does not distinguish between them, e.g., slot-1
and the card in slot-1.";
}
leaf entPhysicalHardwareRev {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.8";
type snmp-framework:SnmpAdminString;
config false;
description
"The vendor-specific hardware revision string for the
physical entity. The preferred value is the hardware
revision identifier actually printed on the component itself
(if present).
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format, in an
implementation-specific manner.
If no specific hardware revision string is associated with
the physical component, or if this information is unknown to
the agent, then this object will contain a zero-length
string.";
}
leaf entPhysicalFirmwareRev {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.9";
type snmp-framework:SnmpAdminString;
config false;
description
"The vendor-specific firmware revision string for the
physical entity.
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format, in an
implementation-specific manner.
If no specific firmware programs are associated with the
physical component, or if this information is unknown to the
agent, then this object will contain a zero-length string.";
}
leaf entPhysicalSoftwareRev {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.10";
type snmp-framework:SnmpAdminString;
config false;
description
"The vendor-specific software revision string for the
physical entity.
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a printable format, in an
implementation-specific manner.
If no specific software programs are associated with the
physical component, or if this information is unknown to the
agent, then this object will contain a zero-length string.";
}
leaf entPhysicalSerialNum {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.11";
type snmp-framework:SnmpAdminString {
length "0..32";
}
description
"The vendor-specific serial number string for the physical
entity. The preferred value is the serial number string
actually printed on the component itself (if present).
On the first instantiation of an physical entity, the value
of entPhysicalSerialNum associated with that entity is set
to the correct vendor-assigned serial number, if this
information is available to the agent. If a serial number
is unknown or non-existent, the entPhysicalSerialNum will be
set to a zero-length string instead.
Note that implementations that can correctly identify the
serial numbers of all installed physical entities do not
need to provide write access to the entPhysicalSerialNum
object. Agents which cannot provide non-volatile storage
for the entPhysicalSerialNum strings are not required to
implement write access for this object.
Not every physical component will have a serial number, or
even need one. Physical entities for which the associated
value of the entPhysicalIsFRU object is equal to 'false(2)'
(e.g., the repeater ports within a repeater module), do not
need their own unique serial number. An agent does not have
to provide write access for such entities, and may return a
zero-length string.
If write access is implemented for an instance of
entPhysicalSerialNum, and a value is written into the
instance, the agent must retain the supplied value in the
entPhysicalSerialNum instance (associated with the same
physical entity) for as long as that entity remains
instantiated. This includes instantiations across all
re-initializations/reboots of the network management system,
including those resulting in a change of the physical
entity's entPhysicalIndex value.";
}
leaf entPhysicalMfgName {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.12";
type snmp-framework:SnmpAdminString;
config false;
description
"The name of the manufacturer of this physical component.
The preferred value is the manufacturer name string actually
printed on the component itself (if present).
Note that comparisons between instances of the
entPhysicalModelName, entPhysicalFirmwareRev,
entPhysicalSoftwareRev, and the entPhysicalSerialNum
objects, are only meaningful amongst entPhysicalEntries with
the same value of entPhysicalMfgName.
If the manufacturer name string associated with the physical
component is unknown to the agent, then this object will
contain a zero-length string.";
}
leaf entPhysicalModelName {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.13";
type snmp-framework:SnmpAdminString;
config false;
description
"The vendor-specific model name identifier string associated
with this physical component. The preferred value is the
customer-visible part number, which may be printed on the
component itself.
If the model name string associated with the physical
component is unknown to the agent, then this object will
contain a zero-length string.";
}
leaf entPhysicalAlias {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.14";
type snmp-framework:SnmpAdminString {
length "0..32";
}
description
"This object is an 'alias' name for the physical entity, as
specified by a network manager, and provides a non-volatile
'handle' for the physical entity.
On the first instantiation of a physical entity, the value
of entPhysicalAlias associated with that entity is set to
the zero-length string. However, the agent may set the
value to a locally unique default value, instead of a
zero-length string.
If write access is implemented for an instance of
entPhysicalAlias, and a value is written into the instance,
the agent must retain the supplied value in the
entPhysicalAlias instance (associated with the same physical
entity) for as long as that entity remains instantiated.
This includes instantiations across all
re-initializations/reboots of the network management system,
including those resulting in a change of the physical
entity's entPhysicalIndex value.";
}
leaf entPhysicalAssetID {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.15";
type snmp-framework:SnmpAdminString {
length "0..32";
}
description
"This object is a user-assigned asset tracking identifier
(as specified by a network manager) for the physical entity,
and provides non-volatile storage of this information.
On the first instantiation of a physical entity, the value
of entPhysicalAssetID associated with that entity is set to
the zero-length string.
Not every physical component will have an asset tracking
identifier, or even need one. Physical entities for which
the associated value of the entPhysicalIsFRU object is equal
to 'false(2)' (e.g., the repeater ports within a repeater
module), do not need their own unique asset tracking
identifier. An agent does not have to provide write access
for such entities, and may instead return a zero-length
string.
If write access is implemented for an instance of
entPhysicalAssetID, and a value is written into the
instance, the agent must retain the supplied value in the
entPhysicalAssetID instance (associated with the same
physical entity) for as long as that entity remains
instantiated. This includes instantiations across all
re-initializations/reboots of the network management system,
including those resulting in a change of the physical
entity's entPhysicalIndex value.
If no asset tracking information is associated with the
physical component, then this object will contain a
zero-length string.";
}
leaf entPhysicalIsFRU {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.16";
type smiv2:TruthValue;
config false;
description
"This object indicates whether or not this physical entity
is considered a 'field replaceable unit' by the vendor. If
this object contains the value 'true(1)' then this
entPhysicalEntry identifies a field replaceable unit. For
all entPhysicalEntries that represent components
permanently contained within a field replaceable unit, the
value 'false(2)' should be returned for this object.";
}
leaf entPhysicalMfgDate {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.17";
type smiv2:DateAndTime;
config false;
description
"This object contains the date of manufacturing of the
managed entity. If the manufacturing date is unknown or not
supported, the object is not instantiated. The special
value '0000000000000000'H may also be returned in this
case.";
}
leaf entPhysicalUris {
smi:oid "1.3.6.1.2.1.47.1.1.1.1.18";
type binary;
description
"This object contains additional identification information
about the physical entity. The object contains URIs and,
therefore, the syntax of this object must conform to RFC
3986, section 2.
Multiple URIs may be present and are separated by white
space characters. Leading and trailing white space
characters are ignored.
If no additional identification information is known
about the physical entity or supported, the object is not
instantiated. A zero length octet string may also be
returned in this case.";
reference
"RFC 3986, Uniform Resource Identifiers (URI): Generic
Syntax, section 2, August 1998.";
}
} // list entPhysicalEntry
} // container entityPhysical
container entityLogical {
smi:oid "1.3.6.1.2.1.47.1.2";
list entLogicalEntry {
smi:oid "1.3.6.1.2.1.47.1.2.1.1";
key "entLogicalIndex";
description
"Information about a particular logical entity. Entities
may be managed by this agent or other SNMP agents (possibly)
in the same chassis.";
leaf entLogicalIndex {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.1";
type int32 {
range "1..2147483647";
}
description
"The value of this object uniquely identifies the logical
entity. The value should be a small positive integer; index
values for different logical entities are not necessarily
contiguous.";
}
leaf entLogicalDescr {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.2";
type snmp-framework:SnmpAdminString;
config false;
description
"A textual description of the logical entity. This object
should contain a string that identifies the manufacturer's
name for the logical entity, and should be set to a distinct
value for each version of the logical entity.";
}
leaf entLogicalType {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.3";
type smiv2:AutonomousType;
config false;
description
"An indication of the type of logical entity. This will
typically be the OBJECT IDENTIFIER name of the node in the
SMI's naming hierarchy which represents the major MIB
module, or the majority of the MIB modules, supported by the
logical entity. For example:
a logical entity of a regular host/router -> mib-2
a logical entity of a 802.1d bridge -> dot1dBridge
a logical entity of a 802.3 repeater -> snmpDot3RptrMgmt
If an appropriate node in the SMI's naming hierarchy cannot
be identified, the value 'mib-2' should be used.";
}
leaf entLogicalCommunity {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.4";
type binary {
length "0..255";
}
config false;
status deprecated;
description
"An SNMPv1 or SNMPv2C community-string, which can be used to
access detailed management information for this logical
entity. The agent should allow read access with this
community string (to an appropriate subset of all managed
objects) and may also return a community string based on the
privileges of the request used to read this object. Note
that an agent may return a community string with read-only
privileges, even if this object is accessed with a
read-write community string. However, the agent must take
care not to return a community string that allows more
privileges than the community string used to access this
object.
A compliant SNMP agent may wish to conserve naming scopes by
representing multiple logical entities in a single 'default'
naming scope. This is possible when the logical entities,
represented by the same value of entLogicalCommunity, have
no object instances in common. For example, 'bridge1' and
'repeater1' may be part of the main naming scope, but at
least one additional community string is needed to represent
'bridge2' and 'repeater2'.
Logical entities 'bridge1' and 'repeater1' would be
represented by sysOREntries associated with the 'default'
naming scope.
For agents not accessible via SNMPv1 or SNMPv2C, the value
of this object is the empty string. This object may also
contain an empty string if a community string has not yet
been assigned by the agent, or if no community string with
suitable access rights can be returned for a particular SNMP
request.
Note that this object is deprecated. Agents which implement
SNMPv3 access should use the entLogicalContextEngineID and
entLogicalContextName objects to identify the context
associated with each logical entity. SNMPv3 agents may
return a zero-length string for this object, or may continue
to return a community string (e.g., tri-lingual agent
support).";
}
leaf entLogicalTAddress {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.5";
type smiv2:TAddress;
config false;
description
"The transport service address by which the logical entity
receives network management traffic, formatted according to
the corresponding value of entLogicalTDomain.
For snmpUDPDomain, a TAddress is 6 octets long: the initial
4 octets contain the IP-address in network-byte order and
the last 2 contain the UDP port in network-byte order.
Consult 'Transport Mappings for the Simple Network
Management Protocol' (STD 62, RFC 3417 [RFC3417]) for
further information on snmpUDPDomain.";
}
leaf entLogicalTDomain {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.6";
type smiv2:TDomain;
config false;
description
"Indicates the kind of transport service by which the
logical entity receives network management traffic.
Possible values for this object are presently found in the
Transport Mappings for Simple Network Management Protocol'
(STD 62, RFC 3417 [RFC3417]).";
}
leaf entLogicalContextEngineID {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.7";
type SnmpEngineIdOrNone;
config false;
description
"The authoritative contextEngineID that can be used to send
an SNMP message concerning information held by this logical
entity, to the address specified by the associated
'entLogicalTAddress/entLogicalTDomain' pair.
This object, together with the associated
entLogicalContextName object, defines the context associated
with a particular logical entity, and allows access to SNMP
engines identified by a contextEngineId and contextName
pair.
If no value has been configured by the agent, a zero-length
string is returned, or the agent may choose not to
instantiate this object at all.";
}
leaf entLogicalContextName {
smi:oid "1.3.6.1.2.1.47.1.2.1.1.8";
type snmp-framework:SnmpAdminString;
config false;
description
"The contextName that can be used to send an SNMP message
concerning information held by this logical entity, to the
address specified by the associated
'entLogicalTAddress/entLogicalTDomain' pair.
This object, together with the associated
entLogicalContextEngineID object, defines the context
associated with a particular logical entity, and allows
access to SNMP engines identified by a contextEngineId and
contextName pair.
If no value has been configured by the agent, a zero-length
string is returned, or the agent may choose not to
instantiate this object at all.";
}
} // list entLogicalEntry
} // container entityLogical
container entityMapping {
smi:oid "1.3.6.1.2.1.47.1.3";
list entLPMappingEntry {
smi:oid "1.3.6.1.2.1.47.1.3.1.1";
key "entLogicalIndex entLPPhysicalIndex";
description
"Information about a particular logical entity to physical
equipment association. Note that the nature of the
association is not specifically identified in this entry.
It is expected that sufficient information exists in the
MIBs used to manage a particular logical entity to infer how
physical component information is utilized.";
leaf entLogicalIndex {
type leafref {
path "/entity-mib:entityLogical/entity-mib:entLogicalEntry/entity-mib:entLogicalIndex";
}
description
"Automagically generated leafref leaf.";
}
leaf entLPPhysicalIndex {
smi:oid "1.3.6.1.2.1.47.1.3.1.1.1";
type PhysicalIndex;
description
"The value of this object identifies the index value of a
particular entPhysicalEntry associated with the indicated
entLogicalEntity.";
}
} // list entLPMappingEntry
list entAliasMappingEntry {
smi:oid "1.3.6.1.2.1.47.1.3.2.1";
key "entPhysicalIndex entAliasLogicalIndexOrZero";
description
"Information about a particular physical equipment, logical
entity to external identifier binding. Each logical
entity/physical component pair may be associated with one
alias mapping. The logical entity index may also be used as
a 'wildcard' (refer to the entAliasLogicalIndexOrZero object
DESCRIPTION clause for details.)
Note that only entPhysicalIndex values that represent
physical ports (i.e., associated entPhysicalClass value is
'port(10)') are permitted to exist in this table.";
leaf entPhysicalIndex {
type leafref {
path "/entity-mib:entityPhysical/entity-mib:entPhysicalEntry/entity-mib:entPhysicalIndex";
}
description
"Automagically generated leafref leaf.";
}
leaf entAliasLogicalIndexOrZero {
smi:oid "1.3.6.1.2.1.47.1.3.2.1.1";
type int32 {
range "0..2147483647";
}
description
"The value of this object identifies the logical entity
that defines the naming scope for the associated instance
of the 'entAliasMappingIdentifier' object.
If this object has a non-zero value, then it identifies the
logical entity named by the same value of entLogicalIndex.
If this object has a value of zero, then the mapping between
the physical component and the alias identifier for this
entAliasMapping entry is associated with all unspecified
logical entities. That is, a value of zero (the default
mapping) identifies any logical entity that does not have
an explicit entry in this table for a particular
entPhysicalIndex/entAliasMappingIdentifier pair.
For example, to indicate that a particular interface (e.g.,
physical component 33) is identified by the same value of
ifIndex for all logical entities, the following instance
might exist:
entAliasMappingIdentifier.33.0 = ifIndex.5
In the event an entPhysicalEntry is associated differently
for some logical entities, additional entAliasMapping
entries may exist, e.g.:
entAliasMappingIdentifier.33.0 = ifIndex.6
entAliasMappingIdentifier.33.4 = ifIndex.1
entAliasMappingIdentifier.33.5 = ifIndex.1
entAliasMappingIdentifier.33.10 = ifIndex.12
Note that entries with non-zero entAliasLogicalIndexOrZero
index values have precedence over zero-indexed entries. In
this example, all logical entities except 4, 5, and 10,
associate physical entity 33 with ifIndex.6.";
}
leaf entAliasMappingIdentifier {
smi:oid "1.3.6.1.2.1.47.1.3.2.1.2";
type smiv2:RowPointer;
config false;
description
"The value of this object identifies a particular conceptual
row associated with the indicated entPhysicalIndex and
entLogicalIndex pair.
Because only physical ports are modeled in this table, only
entries that represent interfaces or ports are allowed. If
an ifEntry exists on behalf of a particular physical port,
then this object should identify the associated 'ifEntry'.
For repeater ports, the appropriate row in the
'rptrPortGroupTable' should be identified instead.
For example, suppose a physical port was represented by
entPhysicalEntry.3, entLogicalEntry.15 existed for a
repeater, and entLogicalEntry.22 existed for a bridge. Then
there might be two related instances of
entAliasMappingIdentifier:
entAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2
entAliasMappingIdentifier.3.22 == ifIndex.17
It is possible that other mappings (besides interfaces and
repeater ports) may be defined in the future, as required.
Bridge ports are identified by examining the Bridge MIB and
appropriate ifEntries associated with each 'dot1dBasePort',
and are thus not represented in this table.";
}
} // list entAliasMappingEntry
list entPhysicalContainsEntry {
smi:oid "1.3.6.1.2.1.47.1.3.3.1";
key "entPhysicalIndex entPhysicalChildIndex";
description
"A single container/'containee' relationship.";
leaf entPhysicalIndex {
type leafref {
path "/entity-mib:entityPhysical/entity-mib:entPhysicalEntry/entity-mib:entPhysicalIndex";
}
description
"Automagically generated leafref leaf.";
}
leaf entPhysicalChildIndex {
smi:oid "1.3.6.1.2.1.47.1.3.3.1.1";
type PhysicalIndex;
description
"The value of entPhysicalIndex for the contained physical
entity.";
}
} // list entPhysicalContainsEntry
} // container entityMapping
container entityGeneral {
smi:oid "1.3.6.1.2.1.47.1.4";
leaf entLastChangeTime {
smi:oid "1.3.6.1.2.1.47.1.4.1";
type yang:timestamp;
config false;
description
"The value of sysUpTime at the time a conceptual row is
created, modified, or deleted in any of these tables:
- entPhysicalTable
- entLogicalTable
- entLPMappingTable
- entAliasMappingTable
- entPhysicalContainsTable";
}
} // container entityGeneral
notification entConfigChange {
smi:oid "1.3.6.1.2.1.47.2.0.1";
description
"An entConfigChange notification is generated when the value
of entLastChangeTime changes. It can be utilized by an NMS
to trigger logical/physical entity table maintenance polls.
An agent should not generate more than one entConfigChange
'notification-event' in a given time interval (five seconds
is the suggested default). A 'notification-event' is the
transmission of a single trap or inform PDU to a list of
notification destinations.
If additional configuration changes occur within the
throttling period, then notification-events for these
changes should be suppressed by the agent until the current
throttling period expires. At the end of a throttling
period, one notification-event should be generated if any
configuration changes occurred since the start of the
throttling period. In such a case, another throttling
period is started right away.
An NMS should periodically check the value of
entLastChangeTime to detect any missed entConfigChange
notification-events, e.g., due to throttling or transmission
loss.";
} // notification entConfigChange
} // module ENTITY-MIB
