netconfcentral logo

bbf-l2-forwarding-shared-fdb

HTML

bbf-l2-forwarding-shared-fdb@2018-12-03



  module bbf-l2-forwarding-shared-fdb {

    yang-version 1.1;

    namespace
      "urn:bbf:yang:bbf-l2-forwarding-shared-fdb";

    prefix bbf-l2-sfdb;

    import iana-if-type {
      prefix ianaift;
    }
    import ietf-interfaces {
      prefix if;
    }
    import bbf-l2-forwarding {
      prefix bbf-l2-fwd;
    }
    import bbf-if-type {
      prefix bbfift;
    }

    organization
      "Broadband Forum <https://www.broadband-forum.org>
     Common YANG Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
     should be directed to <mailto:help@broadband-forum.org>.

     Editor:      Joey Boyd, ADTRAN

     Editor:      Ludwig Pauwels, Nokia

     PS Leader:   Joey Boyd, ADTRAN

     PS Leader:   Ken Kerpez, ASSIA

     WA Director: Joey Boyd, ADTRAN

     WA Director: Sven Ooghe, Nokia";

    description
      "This module contains a collection of YANG definitions for
     supporting the Broadband Forum requirements on layer 2 forwarding
     as applicable to access network equipment. As such, this module
     is specific to access network equipment (e.g., BBF-specified
     Access Nodes and FTTdp DPUs).

     More specific this module contains a collection of YANG
     definitions for managing shared forwarding databases.

     Copyright (c) 2017-2018, Broadband Forum

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.

     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.

     3. Neither the name of the copyright holder nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     The above license is used as a license under copyright only.
     Please reference the Forum IPR Policy for patent licensing terms
     <https://www.broadband-forum.org/ipr-policy>.

     Any moral rights which are necessary to exercise under the above
     license grant are also deemed granted under this license.

     This version of this YANG module is part of TR-383; see
     the TR itself for full legal notices.";

    revision "2018-12-03" {
      description
        "Amendment 2.
       * Approval Date:    2018-12-03.
       * Publication Date: 2018-12-03.";
      reference
        "TR-383a2: Common YANG Modules
        	<https://www.broadband-forum.org/technical/download/
        		 TR-383_Amendment-2.pdf>";

    }

    revision "2018-07-13" {
      description
        "Initial revision.
       * Approval Date:    2018-06-04.
       * Publication Date: see revision date above.";
      reference
        "TR-383: Common YANG Modules
        	<https://www.broadband-forum.org/technical/download/
        		 TR-383_Amendment-1.pdf>";

    }


    grouping ethernet-interface {
      description
        "This grouping is use by data models that need to reference
       configured interfaces that are transporting Ethernet packets.";
      leaf interface {
        type if:interface-ref;
        must
          "derived-from-or-self(
         /if:interfaces/if:interface[if:name = current()]
         /if:type,'ianaift:ethernetCsmacd')
         or
         derived-from-or-self(
         /if:interfaces/if:interface[if:name = current()]
         /if:type,'ianaift:ieee8023adLag')
         or
         derived-from-or-self(
         /if:interfaces/if:interface[if:name = current()]
         /if:type,'ianaift:ptm')
         or
         derived-from(
         /if:interfaces/if:interface[if:name = current()]
         /if:type,'bbfift:ethernet-like')" {
          error-message
            "The interface type must be either derived from
           'ethernetCsmacd', 'ieee8023adLag', 'ptm' or 'ethernet-like'
           or it must be equal to 'ethernetCsmacd', 'ieee8023adLag'
           or 'ptm'.";
        }
        description
          "References an interface transporting Ethernet packets.";
      }
    }  // grouping ethernet-interface

    grouping ethernet-interface-state {
      description
        "This grouping is use by data models that need to reference the
       operationally present interfaces that are transporting Ethernet
       packets.";
      leaf interface {
        type if:interface-state-ref;
        must
          "derived-from-or-self(
         /if:interfaces-state/if:interface[if:name = current()]
         /if:type,'ianaift:ethernetCsmacd')
         or
         derived-from-or-self(
         /if:interfaces-state/if:interface[if:name = current()]
         /if:type,'ianaift:ieee8023adLag')
         or
         derived-from-or-self(
         /if:interfaces-state/if:interface[if:name = current()]
         /if:type,'ianaift:ptm')
         or
         derived-from(
         /if:interfaces/if:interface[if:name = current()]
         /if:type,'bbfift:ethernet-like')" {
          error-message
            "The interface type must be either derived from
           'ethernetCsmacd', 'ieee8023adLag', 'ptm' or 'ethernet-like'
           or it must be equal to 'ethernetCsmacd', 'ieee8023adLag'
           or 'ptm'.";
        }
        description
          "References an interface transporting Ethernet packets.";
      }
    }  // grouping ethernet-interface-state

    augment /bbf-l2-fwd:forwarding/bbf-l2-fwd:forwarding-databases/bbf-l2-fwd:forwarding-database/bbf-l2-fwd:static-mac-address/bbf-l2-fwd:learning-constraint/bbf-l2-fwd:allowed-to-learn-on/bbf-l2-fwd:allow-to-learn-on {
      if-feature bbf-l2-fwd:forwarding-databases and
bbf-l2-fwd:mac-learning;
      description
        "Augments the forwarding database static MAC address
       configuration with a case to specify that the MAC address is
       allowed to learn on one of a list of Ethernet interfaces. This
       case is relevant when shared forwarding databases are used.";
      case ethernet-interfaces {
        if-feature bbf-l2-fwd:shared-forwarding-databases;
        container interface-references {
          description
            "The reference to a list of interfaces that are transporting
           Ethernet packets, the MAC address can be learned on any of
           these interfaces.";
          leaf-list interface {
            type if:interface-ref;
            must
              "derived-from-or-self(
             /if:interfaces/if:interface[if:name = current()]
             /if:type,'ianaift:ethernetCsmacd')
             or
             derived-from-or-self(
             /if:interfaces/if:interface[if:name = current()]
             /if:type,'ianaift:ieee8023adLag')
             or
             derived-from-or-self(
             /if:interfaces/if:interface[if:name = current()]
             /if:type,'ianaift:ptm')
             or
             derived-from(
             /if:interfaces/if:interface[if:name = current()]
             /if:type,'bbfift:ethernet-like')" {
              error-message
                "The interface type must be either derived from
               'ethernetCsmacd', 'ieee8023adLag', 'ptm' or 
               'ethernet-like' or it must be equal to 
               'ethernetCsmacd', 'ieee8023adLag' or 'ptm'.";
            }
            description
              "References an interface transporting Ethernet packets.";
          }
        }  // container interface-references
      }  // case ethernet-interfaces
    }

    augment /bbf-l2-fwd:forwarding/bbf-l2-fwd:forwarding-databases/bbf-l2-fwd:forwarding-database/bbf-l2-fwd:static-mac-address/bbf-l2-fwd:learning-constraint/bbf-l2-fwd:install-in-fdb-on/bbf-l2-fwd:install-on {
      if-feature bbf-l2-fwd:forwarding-databases;
      description
        "Augments the forwarding database static MAC address
       configuration with a case to specify that the MAC address is
       statically assigned to a configured Ethernet interfaces. This
       case is relevant when shared forwarding databases are used.";
      case static-ethernet-interface {
        if-feature bbf-l2-fwd:shared-forwarding-databases;
        container static-interface-reference {
          description
            "The reference to an interface transporting Ethernet packets
           on which the MAC address will be statically installed and
           as such affect the forwarding behavior immediately.";
          uses ethernet-interface;
        }  // container static-interface-reference
      }  // case static-ethernet-interface
    }

    augment /bbf-l2-fwd:forwarding-state/bbf-l2-fwd:forwarding-databases/bbf-l2-fwd:forwarding-database/bbf-l2-fwd:mac-addresses/bbf-l2-fwd:mac-address/bbf-l2-fwd:learned-on {
      if-feature bbf-l2-fwd:forwarding-databases and
bbf-l2-fwd:mac-learning;
      description
        "Augments the forwarding database state data with data per MAC
       address in case a shared forwarding database is used.";
      case interface {
        if-feature bbf-l2-fwd:shared-forwarding-databases;
        description
          "Object referencing a specific interface transporting Ethernet
         packets.";
        uses ethernet-interface-state;

        list forwarder-ports {
          key "index";
          description
            "The list of forwarder-ports to which the forwarding is
           affected by learning the address on the interface. A
           forwarder-port is identified by identifying the forwarder
           and by identifying the port within this forwarder.";
          leaf index {
            type uint32;
            description
              "The index in the list of forwarder-ports.";
          }

          uses bbf-l2-fwd:forwarder-port-state;
        }  // list forwarder-ports
      }  // case interface
    }
  }  // module bbf-l2-forwarding-shared-fdb

Summary

  
  
Organization Broadband Forum <https://www.broadband-forum.org> Common YANG Work Area
  
Module bbf-l2-forwarding-shared-fdb
Version 2018-12-03
File bbf-l2-forwarding-shared-fdb.yang
  
Prefix bbf-l2-sfdb
Namespace urn:bbf:yang:bbf-l2-forwarding-shared-fdb
  
Cooked /cookedmodules/bbf-l2-forwarding-shared-fdb/2018-12-03
YANG /src/bbf-l2-forwarding-shared-fdb@2018-12-03.yang
XSD /xsd/bbf-l2-forwarding-shared-fdb@2018-12-03.xsd
  
Abstract This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on layer 2 forwarding as a...
  
Contact
Comments or questions about this Broadband Forum YANG module
should be directed to <mailto:help@broadband-forum.org>.

Editor:      Joey Boyd, ADTRAN

Editor:      Ludwig Pauwels, Nokia

PS Leader:   Joey Boyd, ADTRAN

PS Leader:   Ken Kerpez, ASSIA

WA Director: Joey Boyd, ADTRAN

WA Director: Sven Ooghe, Nokia

Description

 
This module contains a collection of YANG definitions for
supporting the Broadband Forum requirements on layer 2 forwarding
as applicable to access network equipment. As such, this module
is specific to access network equipment (e.g., BBF-specified
Access Nodes and FTTdp DPUs).

More specific this module contains a collection of YANG
definitions for managing shared forwarding databases.

Copyright (c) 2017-2018, Broadband Forum

Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:

1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above
   copyright notice, this list of conditions and the following
   disclaimer in the documentation and/or other materials
   provided with the distribution.

3. Neither the name of the copyright holder nor the names of its
   contributors may be used to endorse or promote products
   derived from this software without specific prior written
   permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The above license is used as a license under copyright only.
Please reference the Forum IPR Policy for patent licensing terms
<https://www.broadband-forum.org/ipr-policy>.

Any moral rights which are necessary to exercise under the above
license grant are also deemed granted under this license.

This version of this YANG module is part of TR-383; see
the TR itself for full legal notices.

Groupings

Grouping Objects Abstract
ethernet-interface interface This grouping is use by data models that need to reference configured interfaces that are transporting Ethernet packets.
ethernet-interface-state interface This grouping is use by data models that need to reference the operationally present interfaces that are transporting Ethernet packets.