netconfcentral logo

ieee802-dot1q-cfm-types

HTML

ieee802-dot1q-cfm-types@2019-09-30



  module ieee802-dot1q-cfm-types {

    yang-version 1.1;

    namespace
      "urn:ieee:std:802.1Q:yang:ieee802-dot1q-cfm-types";

    prefix cfm-types;

    organization "IEEE 802.1 Working Group";

    contact
      "WG-URL: http://www.ieee802.org/1/
    WG-EMail: stds-802-1-L@ieee.org

    Contact: IEEE 802.1 Working Group Chair
    Postal: C/O IEEE 802.1 Working Group
            IEEE Standards Association
            445 Hoes Lane
            Piscataway
            NJ 08854
            USA
  
    E-mail: STDS-802-1-L@IEEE.ORG";

    description
      "Common types used within ieee802-dot1q-cfm modules.";

    revision "2019-09-30" {
      description
        "Creation for Working Group review.";
      reference
        "IEEE Std 802.1Q-2018, Bridges and Bridged Networks.";

    }


    typedef unicast-mac-address-type {
      type string {
        pattern
          "[0-9a-fA-F][02468aAcCeE](-[0-9a-fA-F]{2}){5}";
      }
      description
        "A unicast destination MAC address. The I/G address bit is
      used to identify the destination MAC address as an individual
      MAC address or a group MAC address. If the I/G address bit is
      0, it indicates that the MAC address field is an individual
      MAC address. If this bit is 1, the MAC address is a group MAC
      address that identifies one or more (or all) stations 
      connected to the IEEE 802 network";
    }

    typedef multicast-class1-mac-address-type {
      type string {
        pattern "(01-80-C2-00-00-3)[0-7]";
      }
      description
        "The multicast class 1 MAC address must take the
      form of 01-80-C2-00-00-3x, where x represents
      the MEG level, with x being a value in the range
      of 0..7.";
    }

    typedef mp-type {
      type enumeration {
        enum "mhf" {
          value 1;
          description "Indicates a MHF.";
        }
        enum "mep" {
          value 2;
          description "Indicates a MEP.";
        }
      }
      description
        "Indicates the type of Maintenance Point.";
    }

    typedef mhf-creation-type {
      type enumeration {
        enum "mhf-none" {
          value 1;
          description
            "No MHFs can be created for designated VID(s) or ISID.";
        }
        enum "mhf-default" {
          value 2;
          description
            "MHFs can be created for designated VID(s) or ISID on any
          Bridge Port through which the VID(s) or ISID can pass, where:
            i) There are no lower active MD levels; or
           ii) There is a MEP at the next lower active MD level on 
               the port.";
        }
        enum "mhf-explicit" {
          value 3;
          description
            "MHFs can be created for designated VID(s) or ISID only
          on Bridge Ports through which the VID(s) or ISID can pass, 
          and only if there is a MEP at the next lower active 
          MD level on the port.";
        }
        enum "mhf-defer" {
          value 4;
          description
            "In the Maintenance Association only, the control of MHF
          creation is deferred to the corresponding variable in
          the enclosing Maintenance Domain.";
        }
      }
      description
        "Indicates if the Management Entity can create MHFs.";
    }

    typedef mp-direction-type {
      type enumeration {
        enum "down" {
          value 1;
          description
            "Down maintenance point, where CFM protocol messages
          are dispatched away from the MAC Relay entity.";
        }
        enum "up" {
          value 2;
          description
            "Up maintenance point, where CFM protocol messages 
          are dispatched towards the MAC Relay entity.";
        }
      }
      description
        "Indicates the direction in which the Maintenance
      Point (MEP or MIP) faces on the Bridge Port.";
    }

    typedef mep-id-type {
      type uint16 {
        range "1..8191";
      }
      description
        "Maintenance association End Point Identifier, which is
      unique over a given Maintenance Association.";
    }

    typedef md-level-type {
      type uint8 {
        range "0..7";
      }
      description
        "Integer identifying the Maintenance Domain Level (MD Level).
      Higher numbers correspond to higher Maintenance Domains,
      those with the greatest physical reach, with the highest
      values for customers' CFM PDUs. Lower numbers correspond
      to lower Maintenance Domains, those with more limited
      physical reach, with the lowest values for CFM PDUs
      protecting single bridges or physical links.";
    }

    typedef port-status-tlv-value-type {
      type enumeration {
        enum "no-port-state-tlv" {
          value 0;
          description
            "Indicates either that no CCM has been received or that
          no port status TLV was present in the last CCM received.";
        }
        enum "blocked" {
          value 1;
          description
            "Ordinary data cannot pass freely through the port on
          which the remote MEP resides.";
        }
        enum "up" {
          value 2;
          description
            "Ordinary data can pass freely through the port on which
          the remote MEP resides.";
        }
      }
      description
        "An enumerated value from the Port Status TLV from the last CCM
      received from the last MEP. It indicates the ability of the
      Bridge Port on which the transmitting MEP resides to pass
      ordinary data, regardless of the status of the MAC.";
    }

    typedef interface-status-tlv-value-type {
      type enumeration {
        enum "no-interface-status-tlv" {
          value 0;
          description
            "Indicates either that no CCM has been received or that
          no interface status TLV was present in the last CCM
          received.";
        }
        enum "up" {
          value 1;
          description
            "The interface is ready to pass packets.";
        }
        enum "down" {
          value 2;
          description
            "The interface can not pass packets.";
        }
        enum "testing" {
          value 3;
          description
            "The interface is in some test mode.";
        }
        enum "unknown" {
          value 4;
          description
            "The interface status cannot be determined for some
          reason.";
        }
        enum "dormant" {
          value 5;
          description
            "The interface is not in a state to pass packets but is in
          a pending state, waiting for some external event.";
        }
        enum "not-present" {
          value 6;
          description
            "Some component of the interface is missing.";
        }
        enum "lower-layer-down" {
          value 7;
          description
            "The interface is down due to state of the lower layer
          interface.";
        }
      }
      description
        "An enumerated value from the Interface Status TLV from the
      last CCM received from the last MEP. It indicates the status
      of the Interface within which the MEP transmitting the CCM
      is configured, or the next lower Interface in the Interface
      Stack, if the MEP is not configured within an Interface.";
    }

    typedef highest-defect-priority-type {
      type enumeration {
        enum "none" {
          value 0;
          description
            "No defects since Fault Notification Generator state
          machine reset.";
        }
        enum "def-rdi-ccm" {
          value 1;
          description
            "The last CCM received by this MEP from some remote MEP
          contained the RDI bit set.";
        }
        enum "def-mac-status" {
          value 2;
          description
            "The last CCM received by this MEP from some remote MEP
          indicating that the transmitting MEP's associated MAC is
          reporting its status via the Port Status TLV or Interface
          Status TLV.";
        }
        enum "def-remote-ccm" {
          value 3;
          description
            "This MEP is not receiving CCMs from some other MEP in its
          configured list.";
        }
        enum "def-error-ccm" {
          value 4;
          description
            "This MEP is receiving invalid CCMs.";
        }
        enum "def-xcon-ccm" {
          value 5;
          description
            "This MEP is receiving CCMs that could be from some other 
          MA.";
        }
      }
      description
        "An enumerated value, equal to the contents of the variable
      highestDefect (20.35.9 and Table 20-1), indicating the
      highest-priority defect that has been present since the MEP
      Fault Notification Generator State Machine was last in the
      FNG_RESET state. 
      The integer value assigned to the enum value determines the
      priority. The higher value corresponds to the higher priority.";
    }

    typedef lowest-alarm-priority-type {
      type enumeration {
        enum "all-def" {
          value 1;
          description
            "Includes def-rdi-ccm, def-mac-status, def-remote-ccm,
          def-error-ccm, and def-xcon-ccm.";
        }
        enum "mac-remote-error-xcon" {
          value 2;
          description
            "Only includes def-mac-status, def-remote-ccm, 
          def-error-ccm, and def-xcon-ccm.";
        }
        enum "remote-error-xcon" {
          value 3;
          description
            "Includes def-remote-ccm, def-error-ccm, and def-xcon-ccm.";
        }
        enum "error-xcon" {
          value 4;
          description
            "Includes def-error-ccm and def-xcon-ccm.";
        }
        enum "xcon" {
          value 5;
          description "Only def-xcon-ccm";
        }
        enum "no-xcon" {
          value 6;
          description
            "No defects def-xcon or lower are to be reported.";
        }
      }
      description
        "Specifies the lowest priority defect that is allowed to
      generate a Fault Alarm (20.9.5). The to be reported defects
      are identified per enum value.";
    }

    typedef sender-id-permission-type {
      type enumeration {
        enum "send-id-none" {
          value 1;
          description
            "The Sender ID TLV is not to be sent.";
        }
        enum "send-id-chassis" {
          value 2;
          description
            "The Chassis ID Length, Chassis ID Subtype, and Chassis ID
          fields of the Sender ID TLV are to be sent.";
        }
        enum "send-id-manage" {
          value 3;
          description
            "The Management Address Length and Management Address
          of the Sender ID TLV are to be sent.";
        }
        enum "send-id-chassis-manage" {
          value 4;
          description
            "The Chassis ID Length, Chassis ID Subtype, Chassis ID, 
          Management Address Length and Management Address fields are
          all to be sent.";
        }
        enum "send-id-defer" {
          value 5;
          description
            "The content of the Sender ID TLV are determined by the
          corresponding Maintenance Domain variable.";
        }
      }
      description
        "Indicates what, if anything, is to be included in the Sender
      ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs.";
    }

    typedef ccm-interval-type {
      type enumeration {
        enum "300hz" {
          value 1;
          description
            "CCM PDUs are sent every 3 1/3 milliseconds (300Hz).";
        }
        enum "10ms" {
          value 2;
          description
            "CCM PDUs are sent every 10 milliseconds.";
        }
        enum "100ms" {
          value 3;
          description
            "CCM PDUs are sent every 100 milliseconds.";
        }
        enum "1sec" {
          value 4;
          description
            "CCM PDUs are sent every second.";
        }
        enum "10sec" {
          value 5;
          description
            "CCM PDUs are sent every 10 seconds.";
        }
        enum "1min" {
          value 6;
          description
            "CCM PDUs are sent every minute.";
        }
        enum "10min" {
          value 7;
          description
            "CCM PDUs are sent every 10 minutes.";
        }
      }
      description
        "Indicates the interval at which CCM PDUs are sent by a MEP.";
    }

    typedef fng-state-type {
      type enumeration {
        enum "fng-reset" {
          value 1;
          description
            "No defect has been present since the MEP's fng-reset-time
          timer expired, or since the state machine was last reset.";
        }
        enum "fng-defect" {
          value 2;
          description
            "A defect is present, but not for a long enough time to be
          reported.";
        }
        enum "fng-report-defect" {
          value 3;
          description
            "A momentary state during which the defect is reported by
          sending a fault-alarm notification, if that action is 
          enabled.";
        }
        enum "fng-defect-reported" {
          value 4;
          description
            "A defect is present, and some defect has been reported.";
        }
        enum "fng-defect-clearing" {
          value 5;
          description
            "No defect is present, but the MEP's fng-reset-time timer
          has not yet expired.";
        }
      }
      description
        "Indicates the different states of the MEP Fault Notification
      Generator State Machine.";
    }

    typedef relay-action-field-value-type {
      type enumeration {
        enum "relay-hit" {
          value 1;
          description
            "The LTM reached a Maintenance Point whose MAC address
          matches the target address.";
        }
        enum "relay-fdb" {
          value 2;
          description
            "The Egress Port was determined by consulting the Filtering
          Database.";
        }
        enum "relay-mpdb" {
          value 3;
          description
            "The Egress Port was determined by consulting the MIP CCM
          Database.";
        }
      }
      description
        "Possible values the Relay action field can take.";
    }

    typedef ingress-action-field-value-type {
      type enumeration {
        enum "ingress-ok" {
          value 1;
          description
            "The target data frame would be passed through to the MAC 
          Relay Entity.";
        }
        enum "ingress-down" {
          value 2;
          description
            "The Bridge Ports MAC_Operational parameter is false.";
        }
        enum "ingress-blocked" {
          value 3;
          description
            "The target data frame would not be forwarded if received on
          this Port due to active topology enforcement.";
        }
        enum "ingress-vid" {
          value 4;
          description
            "The ingress port is not in the member set of the LTMs VID,
          and ingress filtering is enabled, so the target data frame
          would be filtered by ingress filtering.";
        }
      }
      description
        "Possible values returned in the ingress action field.";
    }

    typedef egress-action-field-value-type {
      type enumeration {
        enum "egress-okay" {
          value 1;
          description
            "The targeted data frame would be forwarded.";
        }
        enum "egress-down" {
          value 2;
          description
            "The Egress Port can be identified, but that Bridge Port
          MAC_Operational parameter is false.";
        }
        enum "egress-blocked" {
          value 3;
          description
            "The Egress Port can be identified, but the data frame would
          not pass through the Egress Port due to active topology 
          management (i.e., the Bridge Port is not in the 
          Forwarding state.";
        }
        enum "egress-vid" {
          value 4;
          description
            "The Egress Port can be identified, but the Bridge Port is
          not in the LTMs VIDs member set, so would be filtered by
          egress filtering.";
        }
      }
      description
        "Possible values returned in the egress action field.";
    }

    typedef remote-mep-state-type {
      type enumeration {
        enum "rmep-idle" {
          value 1;
          description
            "Momentary state during reset.";
        }
        enum "rmep-start" {
          value 2;
          description
            "The timer has not expired since the state machine
          was reset, and no valid CCM has yet been received.";
        }
        enum "rmep-failed" {
          value 3;
          description
            "The timer has expired, both since the state machine was
          reset, and since a valid CCM was received.";
        }
        enum "rmep-ok" {
          value 4;
          description
            "The timer has not expired since a valid CCM was received.";
        }
      }
      description
        "Operational state of the remote MEP state machine. This
      state machine monitors the reception of valid CCMs from a
      remote MEP with a specific MEPID. It uses a timer that
      expires in 3.5 times the length of time indicated by the
      MA's ccm-interval object.";
    }

    typedef mep-defects-type {
      type bits {
        bit def-rdi-ccm {
          position 0;
          description
            "A remote MEP reported that RDI bit in its last CCM.";
        }
        bit def-mac-status {
          position 1;
          description
            "Either some remote MEP is reporting its Interface Status
          TLV as not isUp, or all remote MEPs are reporting a Port 
          Status TLV that contains some value other than psUp.";
        }
        bit def-remote-ccm {
          position 2;
          description
            "The MEP is not receiving valid CCMs from at least one of
          the remote MEPs.";
        }
        bit def-error-ccm {
          position 3;
          description
            "The MEP has received at least one invalid CCM whose CCM
          Interval has not yet timed out.";
        }
        bit def-xcon-ccm {
          position 4;
          description
            "The MEP has received at last one CCM from either another 
          MAID or a lower MD level whose CCM Interval has not yet 
          timed out.";
        }
      }
      description
        "A MEP can detect and report a number of defects, and multiple
      defects can be present at the same time.";
    }

    typedef config-error-type {
      type bits {
        bit cfm-leak {
          position 0;
          description
            "MA x is associated with a specific VID list, one or more 
          of the VIDs in MA x can pass through the Bridge Port,
          no Down MEP is configured on any Bridge Port for MA x,
          and some other MA y, at a higher MD Level than MA x, and
          associated with at least one of the VID(s) also in MA x,
          does have a MEP configured on the Bridge Port.";
        }
        bit conflicting-vids {
          position 1;
          description
            "MA x is associated with a specific VID list, an Up MEP is
          configured on MA x on the Bridge Port, and some other MA y,
          associated with at least one of the VID(s) also in MA x,
          also has an Up MEP configured on some Bridge Port.";
        }
        bit excessive-levels {
          position 2;
          description
            "The number of different MD Levels at which MIPs are to be
          created on this port exceeds the Bridge's capabilities.";
        }
        bit overlapped-levels {
          position 3;
          description
            "A MEP is created for one VID at one MD Level, but a MEP is
          configured on another VID at that MD Level or higher,
          exceeding the Bridge's capabilities.";
        }
      }
      description
        "While making the MIP creation evaluation described in
      22.2.3, the management entity can encounter errors in
      the configuration.";
    }

    typedef mep-tx-ltm-flags-type {
      type bits {
        bit use-fdb-only {
          position 1;
          description "Use FDB only";
        }
      }
      description
        "The flags field for LTMs transmitted by the MEP.";
    }

    typedef fault-alarm-type {
      type enumeration {
        enum "address" {
          value 1;
          description
            "Indicates that a Network address to which Fault Alarms
          are to be transmitted should be used.";
        }
        enum "not-transmitted" {
          value 2;
          description
            "Indicates that Fault alarms are not to be transmitted.";
        }
      }
      description
        "The Fault Alarm indicators.";
    }

    typedef lbm-data-tlv-type {
      type binary {
        length "1..1480";
      }
      description
        "The loopback message Data TLV type.";
    }

    typedef name-key-type {
      type string {
        length "1..255";
        pattern '[0-9a-zA-Z\-_.]*';
      }
      description
        "String type with at least 1 and up to 255 of the specified
      characters.";
    }

    typedef seq-number-type {
      type uint32 {
        range "0..4294967295";
      }
      description
        "The transaction identifier or sequence number of the CFM PDU.";
    }

    typedef service-selector-type {
      type enumeration {
        enum "ieee-reserved-0" {
          value 0;
          description
            "Reserved for definition by IEEE 802.1.";
        }
        enum "vlan-id" {
          value 1;
          description
            "12-bit identifier found in a VLAN tag.";
        }
        enum "isid" {
          value 2;
          description
            "24-bit identifier found in an I-TAG.";
        }
        enum "tesid" {
          value 3;
          description "32-bit identifier";
        }
        enum "segid" {
          value 4;
          description "32-bit identifier";
        }
        enum "path-tesid" {
          value 5;
          description "32-bit identifier";
        }
        enum "group-isid" {
          value 6;
          description "24 bit identifier";
        }
        enum "ieee-reserved" {
          value 7;
          description
            "Reserved for definition by IEEE 802.1";
        }
      }
      default "vlan-id";
      description
        "A value that represents a type (and thereby the format)
      of a service-selector-value.";
    }

    typedef service-selector-value-type {
      type uint32 {
        range "1..4294967295";
      }
      description
        "An integer that uniquely identifies a generic MAC Service,
      or none. Examples of service selectors are a VLAN-ID
      and an I-SID. A service-selector-value value is always 
      interpreted within the context of a service-selector-type
      value. Every usage of the service-selector-value textual
      convention is required to specify the
      service-selector-type object that provides the context.
      The value of a service-selector-value object must
      always be consistent with the value of the associated
      service-selector-type object. Attempts to set a
      service-selector-value object to a value inconsistent
      with the associated service-selector-type must fail
      with an inconsistent-value error.";
    }
  }  // module ieee802-dot1q-cfm-types

Summary

  
  
Organization IEEE 802.1 Working Group
  
Module ieee802-dot1q-cfm-types
Version 2019-09-30
File ieee802-dot1q-cfm-types.yang
  
Prefix cfm-types
Namespace urn:ieee:std:802.1Q:yang:ieee802-dot1q-cfm-types
  
Cooked /cookedmodules/ieee802-dot1q-cfm-types/2019-09-30
YANG /src/ieee802-dot1q-cfm-types@2019-09-30.yang
XSD /xsd/ieee802-dot1q-cfm-types@2019-09-30.xsd
  
Abstract Common types used within ieee802-dot1q-cfm modules.
  
Contact
WG-URL: http://www.ieee802.org/1/
WG-EMail: stds-802-1-L@ieee.org

Contact: IEEE 802.1 Working Group Chair
Postal: C/O IEEE 802.1 Working Group
       IEEE Standards Association
       445 Hoes Lane
       Piscataway
       NJ 08854
       USA

E-mail: STDS-802-1-L@IEEE.ORG

Description

 
Common types used within ieee802-dot1q-cfm modules.

Typedefs

Typedef Base type Abstract
ccm-interval-type enumeration Indicates the interval at which CCM PDUs are sent by a MEP.
config-error-type bits While making the MIP creation evaluation described in 22.2.3, the management entity can encounter errors in the configuration.
egress-action-field-value-type enumeration Possible values returned in the egress action field.
fault-alarm-type enumeration The Fault Alarm indicators.
fng-state-type enumeration Indicates the different states of the MEP Fault Notification Generator State Machine.
highest-defect-priority-type enumeration An enumerated value, equal to the contents of the variable highestDefect (20.35.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine was last in the FNG_RESET state. The i...
ingress-action-field-value-type enumeration Possible values returned in the ingress action field.
interface-status-tlv-value-type enumeration An enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interface in the Interface Stack, if the ME...
lbm-data-tlv-type binary The loopback message Data TLV type.
lowest-alarm-priority-type enumeration Specifies the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5). The to be reported defects are identified per enum value.
md-level-type uint8 Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Do...
mep-defects-type bits A MEP can detect and report a number of defects, and multiple defects can be present at the same time.
mep-id-type uint16 Maintenance association End Point Identifier, which is unique over a given Maintenance Association.
mep-tx-ltm-flags-type bits The flags field for LTMs transmitted by the MEP.
mhf-creation-type enumeration Indicates if the Management Entity can create MHFs.
mp-direction-type enumeration Indicates the direction in which the Maintenance Point (MEP or MIP) faces on the Bridge Port.
mp-type enumeration Indicates the type of Maintenance Point.
multicast-class1-mac-address-type string The multicast class 1 MAC address must take the form of 01-80-C2-00-00-3x, where x represents the MEG level, with x being a value in the range of 0..7.
name-key-type string String type with at least 1 and up to 255 of the specified characters.
port-status-tlv-value-type enumeration An enumerated value from the Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status of the MAC.
relay-action-field-value-type enumeration Possible values the Relay action field can take.
remote-mep-state-type enumeration Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the MA's ccm-interval object.
sender-id-permission-type enumeration Indicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs.
seq-number-type uint32 The transaction identifier or sequence number of the CFM PDU.
service-selector-type enumeration A value that represents a type (and thereby the format) of a service-selector-value.
service-selector-value-type uint32 An integer that uniquely identifies a generic MAC Service, or none. Examples of service selectors are a VLAN-ID and an I-SID. A service-selector-value value is always interpreted within the context of a service-selector-type value. Every usage of the serv...
unicast-mac-address-type string A unicast destination MAC address. The I/G address bit is used to identify the destination MAC address as an individual MAC address or a group MAC address. If the I/G address bit is 0, it indicates that the MAC address field is an individual MAC address. ...