netconfcentral logo

org-openroadm-amplifier

HTML

org-openroadm-amplifier@2019-11-29



  module org-openroadm-amplifier {

    yang-version 1.1;

    namespace
      "http://org/openroadm/amplifier";

    prefix amp;

    import org-openroadm-common-amplifier-types {
      prefix
        org-openroadm-common-amplifier-types;
      revision-date "2019-11-29";
    }
    import org-openroadm-common-link-types {
      prefix
        org-openroadm-common-link-types;
      revision-date "2019-11-29";
    }

    organization "Open ROADM MSA";

    contact "OpenROADM.org.";

    description
      "YANG definitions for an amplifier in Network Model


Copyright of the Members of the Open ROADM MSA Agreement dated (c) 2017,
All other rights reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this
  list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation and/or
  other materials provided with the distribution.
* Neither the Members of the Open ROADM MSA Agreement nor the names of its
  contributors may be used to endorse or promote products derived from this software
  without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE MEMBERS OF THE OPEN ROADM MSA  AGREEMENT ''AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT THE MEMBERS OF THE OPEN ROADM MSA  AGREEMENT BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.";

    revision "2019-11-29" {
      description "Version 6.1.0";
    }

    revision "2019-03-29" {
      description "Version 5.0.0";
    }

    revision "2018-11-30" {
      description "Version 4.1.0";
    }

    revision "2018-03-30" {
      description "Version 3.0.0";
    }

    revision "2017-12-15" {
      description "Version 2.2";
    }

    revision "2017-09-29" {
      description "Version 2.1";
    }

    revision "2017-07-28" {
      description
        "Version 2.0.1 - added revision-date to imports";
    }

    revision "2017-06-17" {
      description "Version 2.0";
    }


    grouping amplifier-node-attributes {
      description
        "Defines the group of amplifier attributes";
      leaf amp-type {
        type org-openroadm-common-amplifier-types:amplifier-types;
        mandatory true;
        description "Amplifier type";
      }

      leaf amp-gain-range {
        type org-openroadm-common-amplifier-types:amplifier-gain-range;
        description
          "Amplifier gain-range (gain-range 1 to 4 for switched gain amplifiers)
gain-range-1 for standard amplifiers";
      }

      leaf ingress-span-loss-aging-margin {
        type org-openroadm-common-link-types:ratio-dB;
        description
          "Span-loss margin used to set optical amplifier gain and output-voa
extracted from corresponding device OTS interface container, optional
since it concerns only line facing amp";
      }

      leaf gain {
        type org-openroadm-common-link-types:ratio-dB;
        mandatory true;
        description
          "Overall Amplifier Signal gain, excluding ASE, including VOA attenuation
retrieved from operational value (PM)";
      }

      leaf initially-planned-gain {
        type org-openroadm-common-link-types:ratio-dB;
        description
          "Overall Amplifier Signal gain, excluding ASE, including VOA attenuation:
value coming from planning tool initial design";
      }

      leaf tilt {
        type org-openroadm-common-link-types:ratio-dB;
        description
          "Tilt of smart EDFA retrieved from operational value (PM)";
      }

      leaf initially-planned-tilt {
        type org-openroadm-common-link-types:ratio-dB;
        description
          "Tilt of smart EDFA:
value coming from planning tool initial design";
      }

      leaf out-voa-att {
        type org-openroadm-common-link-types:ratio-dB;
        description "output VOA attenuation";
      }

      leaf initially-planned-out-voa-att {
        type org-openroadm-common-link-types:ratio-dB;
        description
          "output VOA attenuation: value coming from planning tool initial design.
As in R2.0, output VOA can not be configured by controller, this parameter may be used by the controller
to check that value set by amplifiers is in the range of calculated value and take relevant decision if not";
      }

      leaf eol-max-load-pIn {
        type org-openroadm-common-link-types:power-dBm;
        description
          "End Of Life Total input power at maximum load used for amplifier and VOA setting
extracted from corresponding device OTS interface container";
      }

      leaf egress-average-channel-power {
        type org-openroadm-common-link-types:power-dBm;
        description
          "Based upon the total max power across the 4.8 THz passband.";
      }
    }  // grouping amplifier-node-attributes
  }  // module org-openroadm-amplifier

Summary

  
  
Organization Open ROADM MSA
  
Module org-openroadm-amplifier
Version 2019-11-29
File org-openroadm-amplifier.yang
  
Prefix amp
Namespace http://org/openroadm/amplifier
  
Cooked /cookedmodules/org-openroadm-amplifier/2019-11-29
YANG /src/org-openroadm-amplifier@2019-11-29.yang
XSD /xsd/org-openroadm-amplifier@2019-11-29.xsd
  
Abstract YANG definitions for an amplifier in Network Model Copyright of the Members of the Open ROADM MSA Agreement dated (c) 2017, Al...
  
Contact
OpenROADM.org.

Description

 
YANG definitions for an amplifier in Network Model


Copyright of the Members of the Open ROADM MSA Agreement dated (c) 2017,
All other rights reserved.

Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this
  list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation and/or
  other materials provided with the distribution.
* Neither the Members of the Open ROADM MSA Agreement nor the names of its
  contributors may be used to endorse or promote products derived from this software
  without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE MEMBERS OF THE OPEN ROADM MSA  AGREEMENT ''AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT THE MEMBERS OF THE OPEN ROADM MSA  AGREEMENT BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

Groupings

Grouping Objects Abstract
amplifier-node-attributes amp-type amp-gain-range ingress-span-loss-aging-margin gain initially-planned-gain tilt initially-planned-tilt out-voa-att initially-planned-out-voa-att eol-max-load-pIn egress-average-channel-power Defines the group of amplifier attributes