| admin-state |
enumeration |
Represents the various possible administrative states. |
| admin-state |
enumeration |
Represents the various possible administrative states. |
| alarm-state |
bits |
Represents the possible values of alarm states. An alarm is a
persistent indication of an error or warning condition.
When no bits of this attribute are set, then no active alarms
are known against this component and it is not under repair. |
| alarm-state |
bits |
Represents the possible values of alarm states. An alarm is a
persistent indication of an error or warning condition.
When no bits of this attribute are set, then no active alarms
are known against this component and it is not under repair. |
| oper-state |
enumeration |
Represents the possible values of operational states. |
| oper-state |
enumeration |
Represents the possible values of operational states. |
| sensor-status |
enumeration |
A node using this data type represents the operational status
of a physical sensor. |
| sensor-status |
enumeration |
A node using this data type represents the operational status
of a physical sensor. |
| sensor-value |
int32 |
A node using this data type represents an sensor value.
A node of this type SHOULD be defined together with nodes of
type sensor-value-type, sensor-value-scale, and
sensor-value-precision. Together, associated nodes of those
three types are used to identify the semantics of a node of
this data type.
The semantics of a node using this data type are determined by
the value of the associated sensor-value-type node.
If the associated sensor-value-type node is equal to 'voltsAC',
'voltsDC', 'amperes', 'watts', 'hertz', 'celsius', or 'cmm',
then a node of this type MUST contain a fixed point number
ranging from -999,999,999 to +999,999,999. The value
-1000000000 indicates an underflow error. The value +1000000000
indicates an overflow error. The sensor-value-precision
indicates how many fractional digits are represented in the
associated sensor-value node.
If the associated sensor-value-type node is equal to
'percentRH', then a node of this type MUST contain a number
ranging from 0 to 100.
If the associated sensor-value-type node is equal to 'rpm',
then a node of this type MUST contain a number ranging from
-999,999,999 to +999,999,999.
If the associated sensor-value-type node is equal to
'truth-value', then a node of this type MUST contain either the
value 1 (true) or the value 2 (false)'.
If the associated sensor-value-type node is equal to 'other' or
unknown', then a node of this type MUST contain a number
ranging from -1000000000 to 1000000000. |
| sensor-value |
int32 |
A node using this data type represents a sensor value.
A node of this type SHOULD be defined together with nodes of
type sensor-value-type, type sensor-value-scale, and
type sensor-value-precision. Together, associated nodes of
those three types are used to identify the semantics of a node
of this data type.
The semantics of a node using this data type are determined by
the value of the associated sensor-value-type node.
If the associated sensor-value-type node is equal to 'voltsAC',
'voltsDC', 'amperes', 'watts', 'hertz', 'celsius', or 'cmm',
then a node of this type MUST contain a fixed-point number
ranging from -999,999,999 to +999,999,999. The value
-1000000000 indicates an underflow error. The value
+1000000000 indicates an overflow error. The
sensor-value-precision indicates how many fractional digits
are represented in the associated sensor-value node.
If the associated sensor-value-type node is equal to
'percentRH', then a node of this type MUST contain a number
ranging from 0 to 100.
If the associated sensor-value-type node is equal to 'rpm',
then a node of this type MUST contain a number ranging from
-999,999,999 to +999,999,999.
If the associated sensor-value-type node is equal to
'truth-value', then a node of this type MUST contain either the
value 1 (true) or the value 2 (false).
If the associated sensor-value-type node is equal to 'other' or
'unknown', then a node of this type MUST contain a number
ranging from -1000000000 to 1000000000. |
| sensor-value-precision |
int8 |
A node using this data type represents a sensor value
precision range.
A node of this type SHOULD be defined together with nodes of
type sensor-value-type and type sensor-value-scale. Together,
associated nodes of these three types are used to identify the
semantics of a node of type sensor-value.
If a node of this type contains a value in the range 1 to 9,
it represents the number of decimal places in the fractional
part of an associated sensor-value fixed-point number.
If a node of this type contains a value in the range -8 to -1,
it represents the number of accurate digits in the associated
sensor-value fixed-point number.
The value zero indicates the associated sensor-value node is
not a fixed-point number.
Server implementers must choose a value for the associated
sensor-value-precision node so that the precision and accuracy
of the associated sensor-value node is correctly indicated.
For example, a component representing a temperature sensor
that can measure 0 to 100 degrees C in 0.1 degree
increments, +/- 0.05 degrees, would have a
sensor-value-precision value of '1', a sensor-value-scale
value of 'units', and a sensor-value ranging from '0' to
'1000'. The sensor-value would be interpreted as
'degrees C * 10'. |
| sensor-value-precision |
int32 |
A node using this data type represents a sensor value
precision range.
A node of this type SHOULD be defined together with nodes of
type sensor-value-type and sensor-value-scale. Together,
associated nodes of these three types are used to identify the
semantics of a node of type sensor-value.
If a node of this type contains a value in the range 1 to 9,
it represents the number of decimal places in the fractional
part of an associated sensor-value fixed- point number.
If a node of this type contains a value in the range -8 to -1,
it represents the number of accurate digits in the associated
sensor-value fixed-point number.
The value zero indicates the associated sensor-value node is
not a fixed-point number.
Server implementers must choose a value for the associated
sensor-value-precision node so that the precision and accuracy
of the associated sensor-value node is correctly indicated.
For example, a component representing a temperature sensor
that can measure 0 degrees to 100 degrees C in 0.1 degree
increments, +/- 0.05 degrees, would have an
sensor-value-precision value of '1', an sensor-value-scale
value of 'units', and an sensor-value ranging from '0' to
'1000'. The sensor-value would be interpreted as
'degrees C * 10'. |
| sensor-value-scale |
enumeration |
A node using this data type represents a data scaling factor,
represented with an International System of Units (SI) prefix.
The actual data units are determined by examining a node of
this type together with the associated sensor-value-type.
A node of this type SHOULD be defined together with nodes of
type sensor-value-type and sensor-value-precision. Together,
associated nodes of these three types are used to identify the
semantics of a node of type sensor-value. |
| sensor-value-scale |
enumeration |
A node using this data type represents a data scaling factor,
represented with an International System of Units (SI) prefix.
The actual data units are determined by examining a node of
this type together with the associated sensor-value-type.
A node of this type SHOULD be defined together with nodes of
type sensor-value-type and type sensor-value-precision.
Together, associated nodes of these three types are used to
identify the semantics of a node of type sensor-value. |
| sensor-value-type |
enumeration |
A node using this data type represents the sensor measurement
data type associated with a physical sensor value. The actual
data units are determined by examining a node of this type
together with the associated sensor-value-scale node.
A node of this type SHOULD be defined together with nodes of
type sensor-value-scale and type sensor-value-precision.
These three types are used to identify the semantics of a node
of type sensor-value. |
| sensor-value-type |
enumeration |
A node using this data type represents the sensor measurement
data type associated with a physical sensor value. The actual
data units are determined by examining a node of this type
together with the associated sensor-value-scale node.
A node of this type SHOULD be defined together with nodes of
type sensor-value-scale and sensor-value-precision. These
three types are used to identify the semantics of a node of
type sensor-value. |
| standby-state |
enumeration |
Represents the possible values of standby states. |
| standby-state |
enumeration |
Represents the possible values of standby states. |
| usage-state |
enumeration |
Represents the possible values of usage states. |
| usage-state |
enumeration |
Represents the possible values of usage states. |