| admin-state |
enumeration |
This object specifies the This object specifies the Admin State of the AP |
| ant-band-mode |
enumeration |
This object specifies the This object specifies the mode of Antenna band |
| ap-eth-port-duplex |
enumeration |
enumeration for mode of the ethernet port |
| ap-eth-port-speed |
enumeration |
This object specifies the this subtype represents ethernet port speed |
| apf-80211n-ampdu |
enumeration |
80211n AMPDU is present |
| apf-80211n-amsdu |
enumeration |
Specifies the 80211n aggregation msd unit |
| apf-80211-qos-mode |
enumeration |
This object specifies the This object specifies the EDCA profile to be used
in EDCA Parameter set element |
| apf-ate-mode |
enumeration |
This object specifies the This object is used to set the airtime-fairness mode |
| apf-ate-stealing-policy |
enumeration |
This object specifies the This object is used to configure the Optimization Policy
represented by cLApDot11IfType of ATF supported APs, joined
in the controller |
| apf-location-algorithm-type |
enumeration |
This object specifies the this represents algorithm type
and CPU overhead |
| apf-ms-data-upsd-bronze |
enumeration |
Enum type for data upsd bronze |
| apf-ms-data-upsd-gold |
enumeration |
Enum type for data upsd gold |
| apf-ms-data-upsd-platinum |
enumeration |
Enum type for data upsd platinum |
| apf-ms-data-upsd-silver |
enumeration |
Enum type for data upsd silver |
| apf-qos-def-pm-create-status |
enumeration |
QOS def PM create status |
| apf-rogue-rule-rule-match-op |
enumeration |
specifies the type of rule matching that needs to be done |
| apf-vap-80211-authentication |
enumeration |
This object specifies the Type of 802.11 system authentication |
| apf-vap-80211-encryption |
enumeration |
This object specifies the Type of Static WEP Encryption |
| apf-vap-8021x-encryption |
enumeration |
This object specifies the Type of 802.1X Encryption. This applies if
bsnDot11Ess8021xSecurity is in enabled state |
| apf-vap-auto-qos-profile |
enumeration |
Enumeration specifies the group of auto QoS profile |
| apf-vap-key-type |
enumeration |
List all the types of key specified for PSK |
| apf-vap-lan-sub-type |
enumeration |
This object specifies the specifies the sub-type of the LAN created |
| apf-vap-p2p-blocking-action |
enumeration |
Enables point to point communication - Not supported in EWLC |
| apf-vap-pmf-policies |
enumeration |
This object specifies the specifies the 802.11w PFM configuration for a
particular WLAN |
| apf-vap-radio-policies |
enumeration |
represents the radio policy in the wlan |
| apf-vap-wifi-direct-policies |
enumeration |
This object specifies the is used to allow/disallow wi-fi
direct clients to/from joining the infrastructure
network |
| apf-vap-wme-policies |
enumeration |
This object specifies the When enabled, WME Policy is applied on the packets |
| ap-misconfig-state |
enumeration |
Enum for profile-tag misconfigure state |
| app-type |
enumeration |
Applications that support rule configurations |
| ap-role |
enumeration |
Lists all the roles of AP for the case of mesh |
| ap-tag-register-state |
enumeration |
Enum for ap tag registration |
| autoqos-profile |
enumeration |
Enumeration Specifies the group of Auto qos profile |
| ble-ltx-admin-state |
enumeration |
This object specifies the administrative status selected for BLE Management |
| ble-ltx-antenna-diversity-status |
enumeration |
This object specifies the BLE antenna diversity status |
| ble-ltx-antenna-mode |
enumeration |
This object specifies the BLE antenna mode |
| ble-ltx-device |
enumeration |
Enumeration of all the supported BLE devices |
| ble-ltx-device-state |
enumeration |
This object specifies the state of BLE device of AP |
| ble-ltx-iot-feature |
enumeration |
This object specifies the dot15 feature mode |
| ble-ltx-mode |
enumeration |
This object specifies the BLE mode |
| ble-ltx-module-type |
enumeration |
This object specifies the BLE module type |
| ble-ltx-profile |
enumeration |
This object specifies the active chirping profile of BLE |
| ble-ltx-scan-filter |
enumeration |
This object specifies the scan mode selected for BLE Management |
| ble-ltx-scan-state |
enumeration |
This object specifies the scan status selected for BLE Management |
| ble-ltx-vibeacon-status |
enumeration |
This object specifies the viBeacon profile status |
| ble-no-adv-profile-state |
enumeration |
Specifies the no advertisement profile for BLE management |
| calendar-recurrence |
enumeration |
Calendar profile recurrence |
| cdp-cache-duplex |
enumeration |
This object specifies the this object denotes the duplex mode of the
Ethernet interface between the AP and it's
neighboring CDP device, as reported in the most recent
CDP message |
| channel-monitor-mode |
enumeration |
This object specifies the Sets the noise/interference/rogue monitoring channel-list |
| client-type |
enumeration |
Enum for voice client type |
| console-login-status |
enumeration |
Lists the result of operation to dump logs on the AP console |
| controller-index |
enumeration |
Controller index |
| country-code |
enumeration |
Country code |
| crypt-type |
enumeration |
This object specifies the This is to indicate the string encryption type |
| datarate |
enumeration |
Enum for data rate threshold of 802.11 Optimized Roaming |
| dca-chan-width |
enumeration |
enumeration describing channel width |
| dca-chan-width-cap |
enumeration |
enumeration describing channel width |
| dca-threshold |
enumeration |
Enum for DCA sensitivity levels |
| dot11ac-mcs-rate-index |
enumeration |
Enum for Dot11ac MCS Data rate index |
| dot11k-rm-beacon-measurement-scan-report-measurement-modes |
enumeration |
Measurement Modes for 802.11k RM Beacon Measurement Requests for Client Scan Reports |
| dot11k-rm-beacon-measurement-scan-report-number-requests |
enumeration |
Number of 802.11k RM Beacon Measurement Requests for Client Scan Reports |
| dot11k-rm-beacon-measurement-scan-report-triggers |
enumeration |
Triggers to send 802.11k RM Beacon Measurement Requests for Client Scan Reports |
| dot11-min-phy-rate |
enumeration |
This object specifies the This object specifies the minimum physical rate
that should be enabled by a client to successfully join a media
stream |
| eap-method-type |
enumeration |
Lists all supported EAP types in the device |
| edca-profile |
enumeration |
This object specifies the Configure 802.11b EDCA
(Enhanced Distributed Channel Access) parameters |
| enm-admin-status |
enumeration |
Admin status |
| enm-antenna-if-type |
enumeration |
AP antenna interface type |
| enm-antenna-mode |
enumeration |
Enum for Antenna Mode |
| enm-antenna-selection |
enumeration |
Enum for Antenna Selection |
| enm-apf-xor-roam-probe-suppression |
enumeration |
This object specifies the Configures micro-Macro probe suppression arguments |
| enm-beam-selection-mode |
enumeration |
Beam selection mode for AP radio |
| enm-channel-switch-mode |
enumeration |
Enum for channel switch mode |
| enm-controller-index |
enumeration |
Enumeration specifying controller index for an AP |
| enm-controller-name-status |
enumeration |
Controller name status in access point |
| enm-export-anchor-priority-type |
enumeration |
Enum for export anchor priority |
| enm-hs20-supported-version |
enumeration |
Enum for hotspot release version |
| enm-lan-port-config |
enumeration |
Enumeration for AP LAN port configuration |
| enm-lan-port-id |
enumeration |
Enumeration for AP LAN port ID |
| enm-mcast-client-status |
enumeration |
Multicast client status |
| enm-multicast-data-rate |
enumeration |
Enum for Multicast data rate |
| enm-ndp-mode |
enumeration |
Enum to represent the AP neighbor discovery operation type |
| enm-radio-band |
enumeration |
Enumeration for 802.11 radio band |
| enm-radio-dot11-proto-supported |
enumeration |
Highest throughput supported by radio as per 802.11 protocols |
| enm-radio-service-type |
enumeration |
AP radio service type |
| enm-radio-type |
enumeration |
Radio type |
| enm-reset-reason |
enumeration |
Enumeration specifying remote leader reset reason |
| enm-wlan-mdns-sd-cfg |
enumeration |
enum for MDNS mode configuration |
| enum-dual-radio-capable |
enumeration |
Dual radio capability of AP radio |
| enum-dual-radio-mode |
enumeration |
Dual radio mode of AP radio |
| enum-radio-fra-capable |
enumeration |
FRA capability of AP radio |
| enum-radio-mode-op |
enumeration |
Dual radio mode operation of AP radio |
| eogre-client-match-reason |
enumeration |
Enum for matching client type to eogre |
| ewlc-guest-lan-has-wired-vlan |
enumeration |
Enum for Wired Guest controller parameter has_wired_vlan |
| frame-burst-mode |
enumeration |
This object specifies the Configure 802.11ac Frame Burst |
| ft-dot11r-mode |
enumeration |
This object specifies the This object specifies the 802.11r Fast Transition Mode |
| half-life-time |
enumeration |
This object specifies the This object specifies the half-life timeout
for the client |
| ipv6-capwap-checksum-type |
enumeration |
Enumeration denoting IPv6 CAPWAP data checksum type |
| ipv6-proxy |
enumeration |
Enum to denote IPv6 Neighbor Discovery(ND) proxy configuration type |
| lomm-mode-type |
enumeration |
This object specifies the This object represents the monitor mode optimization
on this device |
| mcs-index |
enumeration |
Enum for Dot11ax MCS Data rate index |
| media-stream-decision-status |
enumeration |
Media-stream decision status |
| media-stream-qos |
enumeration |
Specifies the type of media stream used |
| memory-core-dump-flag |
enumeration |
enumeration listing the treatment to the coredump generated at the AP |
| mfp-event |
enumeration |
MFP event types |
| mm-secure-cipher-list |
enumeration |
This object specifies the This object is used to configure secure ciphers, AES256+SHA
or AES256+SHA2 for Mobility tunnel |
| nac-type |
enumeration |
NAC type |
| ndp-capability |
enumeration |
AP neighbor discovery mode capability |
| ndp-type |
enumeration |
Enum for NDP type |
| nw-leg-beam-form |
enumeration |
Enables/disables beam forming on 11g |
| oper-state |
enumeration |
This object specifies the This object represents the operational state
of the physical Ethernet interface on the AP |
| power-injector-selection |
enumeration |
This object specifies the This object specifies the Power Injector selection
value of the AP |
| power-injector-state |
enumeration |
List all the types of power injector modes/options |
| power-mode-type |
enumeration |
This object specifies the This object represents the power status of the AP |
| power-type |
enumeration |
lists all the supported power mode types |
| preferred-mode-type |
enumeration |
enum to denote the capwap preferred mode type |
| rad-cert-type |
enumeration |
This object specifies the Enum values denoting AP Certificate Type |
| radio-neighbor-chan-width |
enumeration |
channel width of neighbor radio |
| radio-type |
enumeration |
This object specifies the this represents various radio band type |
| rate-state |
enumeration |
enumeration listing the type of Tx rate supported |
| reg-domain-status |
enumeration |
Regulatory domain check status |
| rf-dca-chan-width |
enumeration |
enumeration describing channel width |
| rf-rrm-dca-chan-width |
enumeration |
This object specifies the This object specifies how the system performs DCA
channel width selection for the RFProfile |
| rldp-config-mode |
enumeration |
This object specifies the specifies the rogue detection security level |
| rogue-class-type |
enumeration |
represents the categorization of the identified rogues |
| rogue-rldp-result |
enumeration |
Lists all possible results of the rldp operation |
| rogue-security-level |
enumeration |
This object specifies the specifies the rogue detection security level |
| rogue-state |
enumeration |
This object specifies the This attribute is used to specify the state in which the Rogue AP is |
| rrm-channel-change-reason |
enumeration |
RRM channel change reason |
| rrm-chan-width |
enumeration |
RRM channel width |
| rrm-control-mode |
enumeration |
This object specifies the indicates the mode for the RRM algorithm
for the band |
| rrm-dca-chan-width |
enumeration |
This object specifies the this object specifies how the system performs DCA
channel width selection |
| rrm-dca-chan-width-cap |
enumeration |
This object specifies the config 802.11a dynamic channel
assignment algorithm parameters |
| rrm-ed-threshold-level |
enumeration |
This object specifies the This object represents the event driven
RRM threshold level |
| rrm-group-member |
enumeration |
enumeration listing the operation on the RRM group member |
| rule-action |
enumeration |
Supported rule actions |
| rx-sen-sop-threshold-level |
enumeration |
rx sensitivity threshold level |
| slot-id-type |
enumeration |
This object specifies the This subtype represents a various
Slot Id type of an AP |
| slot-radio-sub-band |
enumeration |
This object specifies the This object indicates the sub band on which
this radio operates |
| spam-ap-modes |
enumeration |
This object specifies the Monitor Only Mode Setting |
| support-bundle-status |
enumeration |
Status of support bundle file transfer |
| support-bundle-transfer-mode |
enumeration |
Support bundle file transfer mode |
| timer-profile-action |
enumeration |
timer profile actions |
| work-day |
enumeration |
Lists all the days when rldp can be scheduled |