Cisco-IOS-XR-ipv4-io-oper

This module contains a collection of YANG definitions for Cisco IOS-XR ipv4-io package operational data. This module contains d...

Grouping Objects Abstract
ACL-CONFIG inbound outbound common-in-bound common-out-bound ACL config information
BGP-PA-CONFIG input output BGP PA config information
BGP-PA-DIR enable source destination BGP PA config for ingress/egress direction
HADDR-ARRAY address-array Helper Address List
IF-SUMMARY ip-assigned ip-unnumbered ip-unassigned Count of assigned/unnumbered/unassigned interfaces
IP-ADDR-NODE address prefix-length route-tag List of IP Addresses
IP-TRAFFIC ipv4-stats icmp-stats IP and ICMP Traffic Information
IPV4-IF-BRIEF primary-address vrf-id vrf-name line-state Brief Summary of IP Interface
IPV4-IF-DETAIL acl multi-acl helper-address rpf bgp-pa primary-address vrf-id line-state prefix-length route-tag mtu unreachable redirect direct-broadcast mask-reply rg-id-exists mlacp-active unnumbered-interface-name next-unnumbered-interface-name proxy-arp-disabled flow-tag-src flow-tag-dst config-flags oper-flags arm-flags state-recvd-frm-im cflct-address client-type is-or-event or-im-state or-im-state-rcvd or-im-state-constraint idb-pointer multicast-group secondary-address Detailed Info of IP Interface
IPV4-IF-SUMMARY if-up-up if-up-down if-down-down if-shutdown-down if-up-down-basecaps-up Summary info of IP interfaces
IPV4-IO-ICMP-TRAFFIC received checksum-error unknown output admin-unreachable-sent network-unreachable-sent host-unreachable-sent protocol-unreachable-sent port-unreachable-sent fragment-unreachable-sent admin-unreachable-received network-unreachable-received host-unreachable-received protocol-unreachable-received port-unreachable-received fragment-unreachable-received hopcount-sent reassembly-sent hopcount-received reassebly-received param-error-received param-error-send echo-request-sent echo-request-received echo-reply-sent echo-reply-received mask-request-sent mask-request-received mask-reply-sent mask-reply-received source-quench-received redirect-received redirect-send timestamp-received timestamp-reply-received router-advert-received router-solicit-received ICMP Traffic Information
IPV4-IO-TRAFFIC input-packets received-packets format-errors bad-hop-count bad-source-address bad-header no-protocol no-gateway reassemble-input reassembled reassemble-timeout reassemble-max-drop reassemble-failed options-present bad-option unknown-option bad-security-option basic-security-option extended-security-option cipso-option strict-source-route-option loose-source-route-option record-route-option sid-option timestamp-option router-alert-option noop-option end-option packets-output packets-forwarded packets-fragmented fragment-count encapsulation-failed no-router packet-too-big multicast-in multicast-out broadcast-in broadcast-out lisp-v4-encap lisp-v4-decap lisp-v6-encap lisp-v6-decap lisp-encap-error lisp-decap-error IP Traffic Information
MCAST-GROUP group-address MCast Group List
MULTI-ACL-CONFIG inbound outbound common Multi ACL config information
RPF-CONFIG enable allow-default-route allow-self-ping mode RPF config information

© 2024 YumaWorks, Inc. All rights reserved.