Enumeration of valid FEC capability values for EPON
interfaces with enabled MPCP.
fec-mode
enumeration
Enumeration of valid FEC modes for EPON interfaces.
mpcp-admin-state
enumeration
Enumeration of valid administrative states for a
MultiPoint MAC Control sublayer on the OLT or ONU.
mpcp-llid
uint64
Logical Link Identifiers (LLIDs) are used to identify a
single MAC from a number of MACs which may be present in the
EPON OLT or ONU. LLIDs between the value of 0x07FFE
and 0x7FFF are assigned for ONU discovery and registration.
Other LLIDs are dynamically assigned by the OLT during the
registration process. For a complete description of how the
LLID is used in an EPON device, see IEEE Std 802.3,
Clause 65 for 1G-EPON and Clause 76 for 10G-EPON.
mpcp-llid-count
uint64
Indicates the number of registered LLIDs. The initialization
value is 0. This is applicable for an OLT with the same
value for all logical interfaces and for an ONU.
mpcp-logical-link-admin-state
enumeration
Enumeration of valid administrative states for a logical
link on the OLT or ONU.
mpcp-logical-link-state
enumeration
Enumeration of valid MPCP registration states for EPON
interfaces.
mpcp-maximum-queue-count-per-report
uint8
Defines the maximum number of queues (0-7) in the REPORT
MPCPDU as defined in IEEE Std 802.3, Clause 64 and
Clause 77.
mpcp-mode
enumeration
Enumeration of valid MPCP modes for EPON interfaces.
mpcp-supported
boolean
This object indicates that the given interface supports
MPCP, i.e., it is an Ethernet PON (EPON) interface.
ompe-mode
enumeration
Enumeration of valid OMP-Emulation modes for EPON
interfaces.
power-level
int32
Power level reflects the value of power, as measured at the
optical transceiver, expressed in units of 0.1 dBm.
trx-admin-state
enumeration
Enumeration of valid administrative states for an optical
transceiver.