ietf-rift

This YANG module defines the generic configuration and operational state for the RIFT protocol common to all vendor implementati...

Grouping	Objects	Abstract
addresses	ipv4 ipv6	IPv4 and/or IPv6 address to be used.
address-families	address-families	Containing address families on the interface.
base-node-info	node-level system-id fabric-id pod	The base information of a node.
hierarchy-indications	hierarchy-indications	Flags indicating node configuration in case of ZTP.
lie-elements	label you-are-flood-repeater not-a-ztp-offer you-are-sending-too-quickly	The elements set in the LIEs.
link-capabilities	bfd-capable v4-forwarding-capable mtu-size	The features of neighbor.
link-direction-type	link-direction-type	The type of link.
link-id-pair	local-id remote-id if-index if-name address-families	A pair of local and remote link-id to identify a link between two nodes.
neighbor	proto-major-ver proto-minor-ver sent-offer received-offer received-source-addr link-id-pair cost bandwidth received-link-capabilitiesreceived-in-lies nbr-flood-port tx-flood-port bfd-state outer-security-key-id	The neighbor information.
neighbor-node	link-id-pair cost bandwidth received-link-capabilities	The neighbor information indicated in node TIE.
node-capability	proto-minor-ver flood-reduction hierarchy-indications	The supported capabilities of this node.
prefix-attribute	metric tags monotonic-clock loopback directly-attached from-link label	The attributes of the prefix.
security	security-type shared auth-key-chain	The security parameters.
spf-direction-type	spf-direction-type	The direction type of SPF calculation.
tie-direction-type	tie-direction-type	The direction type of TIE.
tie-header	tie-direction-typeoriginator tie-typetie-number seq size origination-time origination-lifetime remaining-lifetime	TIEs are exchanged between RIFT nodes to describe parts of a network such as links and address prefixes. This is the TIE header information.
tie-type	tie-type	The types of TIE.