While making the MIP creation evaluation described in 22.2.3, the
management entity can encounter errors in the configuration.
fault-alarm-type
enumeration
The Fault Alarm indicators.
fng-state-type
enumeration
Indicates the different states of the MEP Fault Notification
Generator State Machine.
highest-defect-priority-type
enumeration
An enumerated value, equal to the contents of the variable
highestDefect (20.35.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP Fault
Notification Generator State Machine was last in the FNG_RESET
state. The integer value assigned to the enum value determines the
priority. The higher value corresponds to the higher priority.
interface-status-type
enumeration
The set of values available from the Interface Status TLV in CCM PDUs
including the default no-status-tlv
lowest-alarm-priority-type
enumeration
Specifies the lowest priority defect that is allowed to generate
a Fault Alarm (20.9.5). The to be reported defects are identified
per enum value.
mep-defects-type
enumeration
A MEP can detect and report a number of defects, and multiple
defects can be present at the same time.
mep-id-type
uint16
Maintenance association End Point Identifier (MEPID): A 12-bit
identifier, unique over a given Maintenance Association, identifying
a specific MEP.
name-key-type
string
String type with at least 1 and up to 255 of the specified
characters.
operational-state-type
enumeration
This attribute indicates the operational state (current capability) of
a MEP.
port-status-type
enumeration
The set of values available from the Port Status TLV in CCM PDUs
including the default no-status-tlv
remote-mep-state-type
enumeration
Operational state of the remote MEP state machine. This state
machine monitors the reception of valid CCMs from a remote MEP
with a specific MEPID. It uses a timer that expires in 3.5 times
the length of time indicated by the MA's ccm-interval object.