| cfm-domain-config |
md-id level md-name-type none dns-like-name address unsigned-int char-string |
Config parameters relating to a CFM Maintenance Domain. |
| cfm-global-state |
local-meps local-meps-operational cfm-domains cfm-services down-meps up-meps disabled-misconfigured disabled-operational-errors disabled-out-of-resources peer-meps operational-peer-meps peer-meps-with-defects peer-meps-timed-out |
Operational parameters relating to a CFM Maintenance Domain. |
| cfm-top |
cfm |
Top-level grouping for CFM configuration and state |
| delay-measurement-counters-state |
counters |
Delay measurement counters state. |
| delay-measurement-state |
delay-measurement-state |
Delay measurement state. |
| link-loss-forwarding-config |
enable damping-timer action |
Link loss forwarding configuration. |
| loss-measurement-counters-state |
counters |
Loss-measurement-related measurement counters state. |
| loss-measurement-state |
loss-measurement-state |
Loss measurement state grouping. |
| maintenance-association-config |
ma-id group-name ma-name-type primary-vid char-string unsigned-int16 vpn-oui vpn-index ccm-interval loss-threshold |
Configuration for a maintenance association |
| mep-config |
ccm-enabled lowest-priority-defect fng-alarm-time fng-reset-time local-mep-id interface include-mep-port-status-in-tlv include-mep-interface-status-in-tlv direction auto-discovery |
Configuration for a MEP. |
| mep-counters-state |
counters |
Counters for a remote MEP |
| mep-oper-states |
oper-state interface-state fng-state highest-priority-defect mep-defects present-rdi config-errors-detected error-ccm-last-failure counters |
Operational state of a MEP |
| performance-measurement-config |
profile-name enable measurement-type protocol-type frame-size measurement-interval repetition-period intervals-archived packets-per-meaurement-period burst-interval packet-per-burst |
Performance measurement configuration. |
| performance-measurement-state |
loss-measurement-statedelay-measurement-state |
Performance measurement state grouping. |
| rdi-config |
transmit-on-defect |
Remote Defect Indication (RDI) configuration. |
| remote-mep-config |
id mac-address |
Configuration for remote MEPS |
| rmep-counters-state |
counters |
Counters for a remote MEP |
| rmep-oper-states |
rmep-state rmep-failed-ok-time mac-address remote-defect-condition config-errors-detected interface-status-tlv port-status-tlv counters |
Operational state of a MEP |