module CISCO-DYNAMIC-TEMPLATE-TC-MIB {

    yang-version 1;

    namespace
      "urn:ietf:params:xml:ns:yang:smiv2:CISCO-DYNAMIC-TEMPLATE-TC-MIB";

    prefix CISCO-DYNAMIC-TEMPLATE-TC-MIB;

    import ietf-yang-smiv2 {
      prefix smiv2;
    }

    organization "Cisco Systems, Inc.";

    contact
      "Cisco Systems
Customer Service

Postal: 170 W Tasman Drive
San Jose, CA 95134

Tel: +1 800 553-NETS

E-mail: cs-snmp@cisco.com";

    description
      "This MIB module defines textual conventions used by the
CISCO-DYNAMIC-TEMPLATE-MIB and MIB modules that use and expand
on dynamic templates.";

    revision "2012-01-27" {
      description
        "[Revision added by libsmi due to a LAST-UPDATED clause.]";
    }

    revision "2007-09-06" {
      description
        "The initial version of the MIB module.";
    }

    smiv2:alias "ciscoDynamicTemplateTcMIB" {
      smiv2:oid "1.3.6.1.4.1.9.9.783";
    }

    typedef DynamicTemplateName {
      type binary {
        length "1..64";
      }
      description
        "A string-value that identifies a dynamic template.  The
semantics of the string-value are the same as those specified
by the SnmpAdminString textual convention defined by the
SNMP-FRAMEWORK-MIB [RFC3411].";
      reference
        "D. Harrington, R. Resuhn, B. Wijnen, 'An Architecture for
        Describing Simple Network Management Protocol (SNMP)
        Management
        Frameworks', RFC-3411, December 2002.";

    }

    typedef DynamicTemplateType {
      type enumeration {
        enum "other" {
          value 1;
        }
        enum "derived" {
          value 2;
        }
        enum "ppp" {
          value 3;
        }
        enum "ethernet" {
          value 4;
        }
        enum "ipSubscriber" {
          value 5;
        }
        enum "service" {
          value 6;
        }
      }
      description
        "An enumerated integer-value describing the type of dynamic
template:

'other'
    The implementation of the MIB module using this textual
    convention does not recognize the type of dynamic template.

'derived'
    A configuration resulting from the union of the attributes
    contained by all the dynamic templates associated with a
    target.  The system generates a derived configuration, and
    an EMS/NMS cannot directly modify it.  An EMS/NMS can only
    affect a derived configuration by modifying one or more of
    the dynamic templates associated with the target.

'ppp'
    A PPP template is a set of locally-configured attributes
    relating to the configuration of a PPP interface.

'ethernet'
    An Ethernet template is a set of locally-configured
    attributes used by the system to configure dynamic
    interfaces initiated on Ethernet virtual interfaces (e.g.,
    EoMPLS) or automatically created VLANs.

'ipSubscriber'
    An IP subscriber template is a set of locally-configured
    attributes used by the system to configure certain types of
    IP and L2 subscriber sessions.

'service'
    A service template is a set of locally-configured attributes
    used by the system to configure subscriber sessions.  These
    attributes specifically relate to services, and the system
    applies these attributes in response to subscriber session
    life-cycle events.";
    }

    typedef DynamicTemplateTargetType {
      type enumeration {
        enum "other" {
          value 1;
        }
        enum "interface" {
          value 2;
        }
      }
      description
        "An enumerated integer-value describing the type of target
associated with one or more dynamic templates:

    'other'
	The implementation of the MIB module using this textual
	convention does not recognize the type of target.

    'interface'
	The target is a physical, logical, or virtual interface
	represented by an ifEntry (defined by the IF-MIB).

An implementation must ensure that DynamicTemplateTargetType
object and any associated DynamicTemplateTargetId objects are
consistent.  An attempt to set a DynamicTemplateTargetType
object to a value inconsistent with the associated
DynamicTemplateTargetId object must result in a response with
an
error-status of 'inconsistentValue'.";
      reference
        "K. McCloghrie and F. Kastenholtz, 'The Interfaces Group
        MIB',
        RFC-2863, June 2000.";

    }

    typedef DynamicTemplateTargetId {
      type binary {
        length "1..20";
      }
      description
        "An binary string-value in network byte order identifying a
target associated with one or more dynamic templates.

An implementation must interpret a DynamicTemplateTargetId
value
within the context of a DynamicTemplateTargetType.  Every usage
of the DynamicTemplateTargetId textual convention must have a
corresponding object specifying the DynamicTemplateType that
provides this context.  It is most appropriate that a MIB
module
logical registers the DynamicTemplateType object before the use
of the DynamicTemplateTargetId textual convention within the
same logical row.

The value of a DynamicTemplateTargetId object must always be
consistent with the value of the associated
DynamicTemplateTargetType object.  An attempt to set a
DynamicTemplateTargetId object to a value inconsistent with the
with the associated DynamicTemplateTargetType object must
result
in a response with an error-status of 'inconsistentValue'.

If the DynamicTemplateTargetType is 'interface', then the representation
of DynamicTemplateTargetId is as below

octets   contents              encoding
 1-4     ifIndex               network-byte order";
      reference
        "K. McCloghrie and F. Kastenholtz, 'The Interfaces Group
        MIB',
        RFC-2863, June 2000.";

    }
  }  // module CISCO-DYNAMIC-TEMPLATE-TC-MIB