module bbf-ancp-interfaces {

    yang-version 1.1;

    namespace
      "urn:bbf:yang:bbf-ancp-interfaces";

    prefix bbf-ancp-if;

    import ietf-interfaces {
      prefix if;
    }
    import bbf-ancp {
      prefix bbf-ancp;
    }
    import bbf-dot1q-types {
      prefix bbf-dot1qt;
    }
    import ietf-yang-types {
      prefix yang;
    }

    organization
      "Broadband Forum <https://www.broadband-forum.org>
     Common YANG Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
     should be directed to <mailto:help@broadband-forum.org>.

     Editor:      Nick Hancock, ADTRAN

     Editor:      Ludwig Pauwels, Nokia

     PS Leader:   Joey Boyd, ADTRAN

     WA Director: Joey Boyd, ADTRAN

     WA Director: Sven Ooghe, Nokia";

    description
      "This module contains a collection of YANG definitions for
     supporting the Broadband Forum requirements on the Access Node
     Control Protocol (ANCP) as defined in RFC 6320. As such, this
     module is specific to access network equipment (e.g., BBF-
     specified Access Nodes and FTTdp DPUs).

     Specifically, this module augments ietf-interfaces to manage
     individual access lines that participate in ANCP.

     Copyright (c) 2017-2022, Broadband Forum

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.

     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.

     3. Neither the name of the copyright holder nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     The above license is used as a license under copyright only.
     Please reference the Forum IPR Policy for patent licensing terms
     <https://www.broadband-forum.org/ipr-policy>.

     Any moral rights which are necessary to exercise under the above
     license grant are also deemed granted under this license.

     This version of this YANG module is part of TR-383a5; see
     the TR itself for full legal notices.";

    reference
      "RFC 6320";


    revision "2022-03-01" {
      description
        "Amendment 5.
       * Approval Date:    2022-03-01.
       * Publication Date: 2022-03-01.";
      reference
        "TR-383a5: Common YANG Modules
        	  <https://www.broadband-forum.org/technical/download/
        		   TR-383_Amendment-5.pdf>";

    }

    revision "2020-10-13" {
      description
        "Amendment 3.
       * Approval Date:    2020-10-13.
       * Publication Date: 2020-10-13.";
      reference
        "TR-383a3: Common YANG Modules
        	  <https://www.broadband-forum.org/technical/download/
        		   TR-383_Amendment-3.pdf>";

    }


    feature access-aggregation-circuit-id {
      description
        "Indicates support for the configuration of which value(s) are
       to be used in the Access-Aggregation-Circuit-ID-Binary and/or
       in the Access-Aggregation-Circuit-ID-ASCII TLVs.";
    }

    feature topology-discovery-statistics {
      description
        "Indicates support for Topology Discovery statistics per
       interface managed by an ANCP session.";
    }

    augment /if:interfaces/if:interface {
      description
        "Additions for the management of access lines for ANCP.";
      container ancp {
        presence
          "Presence of this container indicates ANCP functionality is
         enabled on this interface. The set of interfaces on which
         ANCP can be supported is dependent on the specific device
         and type of interface.

         For example, on DPUs ANCP is used to manage DSL lines, i.e.,
         interfaces of the type 'fastdsl'; on OLTs ANCP is used to
         manage 'v-ani' interfaces.";
        description
          "ANCP access line configuration parameters.";
        leaf partition {
          type leafref {
            path "/bbf-ancp:ancp/bbf-ancp:partitions/bbf-ancp:partition/bbf-ancp:partition-id";
          }
          mandatory true;
          description
            "Reference to the ANCP partition, in which the access line
           is managed.";
        }

        container access-aggregation-circuit-id {
          if-feature access-aggregation-circuit-id;
          presence
            "Enables management of the value(s) to be used in the
                  Access-Aggregation-Circuit-ID-Binary and Access-
                  Aggregation-Circuit-ID-ASCII TLVs.";
          description
            "Configuration specific to the Access-Aggregation-Circuit-
           ID-Binary and Access-Aggregation-Circuit-ID-ASCII TLVs.

           If this container is not present, the system shall default
           to the 'auto-derived' method of determining the value(s)
           to be used in the Access-Aggregation-Circuit-ID-Binary
           and Access-Aggregation-Circuit-ID-ASCII TLVs.";
          choice access-aggregation-circuit-id {
            mandatory true;
            description
              "Selects the mechanism for determining the value(s) to be
             used in the Access-Aggregation-Circuit-ID-Binary and/or
             in the Access-Aggregation-Circuit-ID-ASCII TLVs in ANCP
             messages for this access line.

             The format in which the values shall be used for the
             Access-Aggregation-Circuit-ID-Binary TLV is defined in
             the referenced standard. The format to use in the
             Access-Aggregation-Circuit-ID-ASCII is configurable per
             ANCP session.";
            reference
              "RFC 6320 section 5.1.2.3 and 5.1.2.4";

            case auto-derived {
              description
                "Configures that the value(s) to be used in the Access-
               Aggregation-Circuit-ID-Binary and/or Access-
               Aggregation-Circuit-ID-ASCII TLVs will be automatically
               derived from the available VLAN sub-interface
               configuration for this interface and related forwarding
               and network side configuration.";
              leaf auto-derived {
                type empty;
                description
                  "The value corresponds to the VLAN ID used in frames
                 on the uplink interface that are the forwarding
                 result of frames received on this subscriber
                 interface. If all frames received on the subscriber
                 interface are not forwarded with the same VLAN ID(s)
                 to the network, then the VLAN ID(s) put in the ANCP
                 messages is determined from the configuration
                 associated with this interface that classifies
                 ingress frames with the lowest VLAN ID value,
                 combined with the related forwarding and network-
                 side VLAN configuration.";
              }
            }  // case auto-derived

            case explicit {
              description
                "Configures that the value(s) to be used in the Access-
               Aggregation-Circuit-ID-Binary and/or in the Access-
               Aggregation-Circuit-ID-ASCII TLVs will be specified
               explicitly by the client.";
              list access-aggregation-vlan-id {
                key "index";
                max-elements 2;
                description
                  "The VLAN IDs to be inserted in the Access-
                 Aggregation-Circuit-ID-Binary and Access-Aggregation-
                 Circuit-ID-ASCII TLVs.";
                leaf index {
                  type uint8 {
                    range "0..1";
                  }
                  must
                    '(count(../../access-aggregation-vlan-id[index=0])'
                      + ' > 0)' {
                    error-message
                      "A second VLAN ID can only be specified if also "
                        + "a first VLAN ID specified.";
                    description
                      "Only allow a second if there is also a first
                     VLAN ID.";
                  }
                  description
                    "The index into the VLAN ID list.";
                }

                leaf vlan-id {
                  type bbf-dot1qt:vlan-id;
                  mandatory true;
                  description "The VLAN ID.";
                }
              }  // list access-aggregation-vlan-id
            }  // case explicit
          }  // choice access-aggregation-circuit-id
        }  // container access-aggregation-circuit-id
      }  // container ancp
    }

    augment /bbf-ancp:ancp/bbf-ancp:partitions/bbf-ancp:partition/bbf-ancp:sessions/bbf-ancp:session/bbf-ancp:statistics {
      if-feature bbf-ancp-if:topology-discovery-statistics;
      description
        "Augment ANCP session statistics with Topology Discovery
       statistics.";
      container access-lines {
        presence
          "Indicates availability of access line port message statistics
         for the ANCP session.";
        description
          "Topology Discovery statistics for access lines managed by
         this session.";
        list access-line {
          key "interface";
          description
            "An access line managed by this session.";
          leaf interface {
            type if:interface-ref;
            description
              "Identifies the interface representing the access line.";
          }

          leaf out-port-up {
            type yang:zero-based-counter32;
            mandatory true;
            description
              "The number of Port Up messages associated with this
             interface that have been transmitted by the Access
             Node within this session.";
          }

          leaf out-port-down {
            type yang:zero-based-counter32;
            mandatory true;
            description
              "The number of Port Down messages associated with this
             interface that have been transmitted by the access
             node within this session.";
          }
        }  // list access-line
      }  // container access-lines
    }
  }  // module bbf-ancp-interfaces