submodule bbf-fast-tdd-profile-body {

    yang-version 1.1;

    belongs-to bbf-fast {
        prefix bbf-fast;
    }

    include bbf-fast-base;

    organization
      "Broadband Forum <https://www.broadband-forum.org>
Common YANG Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
should be directed to <mailto:help@broadband-forum.org>.

Editor:      Ken Kerpez, ASSIA, Inc.

Editor:      Joey Boyd, Adtran

PS Leader:   Joey Boyd, Adtran

WA Director: Sven Ooghe, Nokia

WA Director: Joey Boyd, Adtran";

    description
      "This submodule contains a collection of YANG definitions for
managing Time Division Duplexing (TDD) profiles.

Copyright (c) 2016-2022 Broadband Forum

Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:

1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above
   copyright notice, this list of conditions and the following
   disclaimer in the documentation and/or other materials
   provided with the distribution.

3. Neither the name of the copyright holder nor the names of its
   contributors may be used to endorse or promote products
   derived from this software without specific prior written
   permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The above license is used as a license under copyright only.
Please reference the Forum IPR Policy for patent licensing terms
<https://www.broadband-forum.org/ipr-policy>.

Any moral rights which are necessary to exercise under the above
license grant are also deemed granted under this license.

This version of this YANG module is part of TR-355a4; see
the TR itself for full legal notices.";

    revision "2022-05-23" {
      description
        "Amendment 4.
* Approval Date:    2022-05-23
* Publication Date: 2022-05-23.";
      reference
        "TR-355a4: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-4.pdf>";

    }

    revision "2020-10-13" {
      description
        "Amendment 3.
* Approval Date:    2020-10-13
* Publication Date: 2020-10-13.";
      reference
        "TR-355a3: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-3.pdf>";

    }

    revision "2020-01-17" {
      description
        "Amendment 2 Corrigendum 2.
* Approval Date:    2020-01-17
* Publication Date: 2020-01-17.";
      reference
        "TR-355a2c2: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-2.pdf>";

    }

    revision "2019-10-21" {
      description
        "Amendment 2 Corrigendum 1.
* Approval Date:    2019-10-21
* Publication Date: 2019-10-21.";
      reference
        "TR-355a2c1: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-2.pdf>";

    }

    revision "2019-06-11" {
      description
        "Amendment 2.
* Approval Date:    2019-06-11
* Publication Date: 2019-06-11.";
      reference
        "TR-355a2: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Amendment-2.pdf>";

    }

    revision "2018-10-01" {
      description
        "Amendment 1.
* Approval Date:    2018-10-01
* Publication Date: 2018-10-01.";
      reference
        "TR-355a1: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Amendment-1.pdf>";

    }

    revision "2017-03-13" {
      description
        "Corrigendum 1 (fixes to the initial revision).
* Approval Date:    see revision date above.
* Publication Date: 2017-04-12.";
      reference
        "TR-355c1: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Corrigendum-1.pdf>";

    }

    revision "2016-07-18" {
      description
        "Initial revision.
* Approval Date:    see revision date above.
* Publication Date: 2016-08-05.";
      reference
        "TR-355: YANG Modules for FTTdp Management
        	<https://www.broadband-forum.org/technical/download/
        		 TR-355.pdf>";

    }


    grouping time-division-duplexing-parameters {
      description
        "Time Division Duplexing (TDD) configuration parameters.";
      reference
        "ITU-T G.997.2 clause 7.1.1";

      leaf total-symbol-periods {
        type uint8 {
          range "23 | 36";
        }
        default "36";
        description
          "Defines the total number of symbol periods in a Time Division
Duplexing (TDD) frame.";
        reference
          "ITU-T G.997.2 clause 7.1.1.1 (MF);
          ITU-T G.9701 clause 10.5";

      }

      leaf downstream-symbol-periods {
        type uint8 {
          range "6..32";
        }
        must
          "(../total-symbol-periods = 23 and .>= 6 and .<= 19) or
(../total-symbol-periods = 36 and .>= 10 and .<= 32)" {
          error-message
            "Either the 'total-symbole-periods' is 23 and 'downstream-symbol-periods' is not in the range of 6 to 19 or 'total-symbol-periods' is 36 and 'downstream-symbol-periods' is not in the range of 10 to 32.";
          description
            "If the total symbol periods is 23, the number of downstream
symbol periods must be between 6 to 19 inclusive. If the
total symbol periods is 36, the number of downstream symbol
periods must be between 10 to 32 inclusive.";
        }
        default "28";
        description
          "Defines the total number of symbol positions in a Time
Division Duplexing (TDD) frame allocated for downstream
transmission. The total number of symbol positions in a TDD
frame allocated for upstream transmission is calculated as
Mus = MF-1-Mds.";
        reference
          "ITU-T G.997.2 clause 7.1.1.2 (Mds);
          ITU-T G.9701 clause 10.5";

      }

      leaf cyclic-extension {
        type uint8 {
          range
            "4 | 8 | 10 | 12 | 14 | 16 | 20 | 24 | 30 | 33";
        }
        units "n samples";
        default "10";
        description
          "Defines the cyclic extension(Lcp) to be used. The units
are in N/64 samples, where N = index of the highest
supported downstream data-bearing sub-carrier as defined
for the enabled profile plus one.";
        reference
          "ITU-T G.997.2 clause 7.1.1.3 (CE);
          ITU-T G.9701 clause 10.4.4 and Table 6-1";

      }

      container dynamic-time-assignment {
        if-feature bbf-fast:dta;
        description
          "Configuration of Dynamic Time Assignement (DTA).";
        leaf dta-allowed {
          type enumeration {
            enum "none" {
              value 0;
              description
                "Dynamic Time Assignment (DTA) is not allowed.";
            }
            enum "idta" {
              value 1;
              description
                "Operation according to ITU-T G.9701 Annex X (iDTA) is
allowed. If 'annex-x-mode' in the vectoring profile
is configured as 'forbidden', then this value must not
be configured.";
            }
            enum "cdta" {
              value 2;
              description
                "Operation according to ITU-T G.9701 Annex D (cDTA) is
allowed. If 'annex-d-mode' in the vectoring profile
is configured as 'forbidden', then this value must not
be configured.";
            }
          }
          default "none";
          description
            "The type of Dynamic Time Assignment (DTA) allowed.";
          reference
            "ITU-T G.997.2 clauses T.2.1.2 (IDTA_ALLOWED) and T.2.1.4
            (CDTA_ALLOWED);
            ITU-T G.9701 clauses X.6.7.2, T.2.2, D.5.7.2 and T.2.2.1";

        }

        leaf preferred-mds {
          type uint8 {
            range "5..31";
          }
          must
            "(((../dta-allowed='idta' and ../../total-symbol-periods =
23 and .>= 5 and .<= 17) or (../dta-allowed='idta' and
../../total-symbol-periods = 36 and .>= 5 and .<= 30) or
(../dta-allowed='cdta' and ../../total-symbol-periods =
23 and .>= 6 and .<= 19) or (../dta-allowed='cdta' and
../../total-symbol-periods = 36 and .>= 10 and .<= 31))
and (. >= ../minimum-mds) and (. <= ../maximum-mds))
or ../dta-allowed='none'" {
            error-message
              "'preferred-mds' is either less than 'minimum-mds' or is greater than 'maximum-mds' depending on the configured values of 'dta-allowed' and 'total-symbol-periods'.";
            description
              "The preferred Mds for Dynamic Time Assignment (DTA)
must be equal to or higher than the minimum Mds for DTA
and less than or equal to the maximum Mds for DTA. The
valid range depends on total symbol period (MF) and DTA
type allowed.";
          }
          default "28";
          description
            "Provides the number of downstream symbol positions in a
Time Division Duplexing (TDD) frame requested by the
Dynamic Resource Allocation (DRA) at the first opportunity
upon entering showtime of a line on which Dynamic Time
Assignment (DTA) operation is enabled. If MF=23, a value
different from the default value needs to be configured.";
          reference
            "ITU-T G.997.2 clause T.2.2.1 (DTA_PREF_Mds);
            ITU-T G.9701 clause T.2.3";

        }

        leaf maximum-step-size {
          type uint8 {
            range "1..25";
          }
          must
            "(../dta-allowed='idta' and ../../total-symbol-periods =
23 and .>= 1 and .<= 12) or (../dta-allowed='idta' and
../../total-symbol-periods = 36 and .>= 1 and .<= 25) or
(../dta-allowed='cdta' and ../../total-symbol-periods =
23 and .>= 1 and .<= 13) or (../dta-allowed='cdta' and
../../total-symbol-periods = 36 and .>= 1 and .<= 21) or
../dta-allowed='none'" {
            error-message
              "'maximum-step-size' is not valid based on the configured values of 'dta-allowed' and 'total-symbol-periods'.";
            description
              "The maximum step size must be restricted to the valid
range depending on total symbol periods (MF) and
Dynamic Time Assignment (DTA) type allowed.";
          }
          default "25";
          description
            "Defines the maximum step size for Mds requested by the DRA
for a single Dynamic Time Assignment (DTA) update. For
configurations other than independent Dynamic Time
Assignment (iDTA) allowed with MF=36, a value different
from the default value needs to be configured.";
          reference
            "ITU-T G.997.2 clause T.2.2.2 (DTA_SMAX);
            ITU-T G.9701 clause T.2.3";

        }

        leaf minimum-time-between-updates {
          type uint16 {
            range "0..16383";
          }
          units "0.01 seconds";
          default "0";
          description
            "Provides the minimum time between any two successive
Dynamic Time Assignment (DTA) updates during showtime.";
          reference
            "ITU-T G.997.2 clause T.2.2.8 (DTA_MIN_TIME);
            ITU-T G.9701 clause T.2.10";

        }

        leaf minimum-mds {
          type uint8 {
            range "5..31";
          }
          must
            "(((../dta-allowed='idta' and ../../total-symbol-periods =
23 and .>= 5 and .<= 17) or (../dta-allowed='idta' and
../../total-symbol-periods = 36 and .>= 5 and .<= 30) or
(../dta-allowed='cdta' and ../../total-symbol-periods =
23 and .>= 6 and .<= 19) or (../dta-allowed='cdta' and
../../total-symbol-periods = 36 and .>= 5 and .<= 31))
and . <= ../../downstream-symbol-periods) or
../dta-allowed='none'" {
            error-message
              "'minimum-mds' is not valid based on the configured values of 'dta-allowed' and 'total-symbol-periods'.";
            description
              "The minimum Mds must be restricted to the valid
range depending on total symbol periods (MF), Dynamic
Time Assignment (DTA) type allowed, and downstream
symbol periods.";
          }
          default "5";
          description
            "Provides the minimum number of downstream symbol positions
Mds in a Time Division Duplexing (TDD) frame that shall be
requested by the Dynamic Time Assignment (DTA). For
configurations with cDTA allowed, a value different from
the default value needs to be configured.";
          reference
            "ITU-T G.997.2 clause T.2.2.3 (DTA_MIN_Mds);
            ITU-T G.9701 clause T.2.5";

        }

        leaf maximum-mds {
          type uint8 {
            range "5..31";
          }
          must
            "(((../dta-allowed='idta' and ../../total-symbol-periods =
23 and .>= 5 and .<= 17) or (../dta-allowed='idta' and
../../total-symbol-periods = 36 and .>= 5 and .<= 30) or
(../dta-allowed='cdta' and ../../total-symbol-periods =
23 and .>= 6 and .<= 19) or (../dta-allowed='cdta' and
../../total-symbol-periods = 36 and .>= 10 and .<= 31))
and . >= ../../downstream-symbol-periods) or
../dta-allowed='none'" {
            error-message
              "'maximum-mds' is not valid based on the configured values of 'dta-allowed' and 'total-symbol-periods'.";
            description
              "The maximum Mds must be restricted to the valid
range depending on total symbol periods (MF), Dynamic
Time Assignment (DTA) type allowed, and downstream
symbol periods.";
          }
          default "30";
          description
            "Provides the maximum number of downstream symbol positions
Mds in a Time Division Duplexing (TDD) frame that shall be
requested by the Dynamic Resource Allocation (DRA). For
configurations with MF=23, a value different from the
default value needs to be configured.";
          reference
            "ITU-T G.997.2 clause T.2.2.4 (DTA_MAX_Mds);
            ITU-T G.9701 clauses X.6.7.4 and T.2.6";

        }

        leaf cdta-procedure-control {
          when "../dta-allowed='cdta'" {
            description
              "Only applicable when Coordinated Dynamic Time Assignment
(cDTA) is configured.";
          }
          if-feature bbf-fast:annex-d;
          type enumeration {
            enum "one-or-two-step" {
              value 0;
              description
                "Dynamic Resource Allocation (DRA) is allowed to use the
one-step or two-step Coordinated Dynamic Time
Assignment (cDTA) procedure.";
            }
            enum "one-step-only" {
              value 1;
              description
                "Dynamic Resource Allocation (DRA) shall use the
one-step Coordinated Dynamic Time Assignment (cDTA)
procedure only.";
            }
            enum "two-step-only" {
              value 2;
              description
                "Dynamic Resource Allocation (DRA) shall use the
two-step procedure only. This value is intended to be
used for test purposes.";
            }
          }
          default "one-or-two-step";
          description
            "Provides the procedure type that the Dynamic Resource
Allocation (DRA) is allowed to apply. If the CDTA_PROC_CTRL
is set to 2 and the FAST Transceiver Unit - central Office
(FTU-O) does not support the two-step procedure, no
Coordinated Dynamic Time Assignment (cDTA) procedure is
triggered by the DRA.";
          reference
            "ITU-T G.997.2 clause T.2.7 (CDTA_PROC_CTRL);
            ITU-T G.9701 clauses T.2.9 and Y.5.6";

        }
      }  // container dynamic-time-assignment
    }  // grouping time-division-duplexing-parameters

    grouping tdd-profile {
      description
        "Defines the contents of a Time Division Duplexing (TDD)
Profile.";
      uses time-division-duplexing-parameters;
    }  // grouping tdd-profile
  }  // submodule bbf-fast-tdd-profile-body