bbf-hardware-rpf-dpu-state

This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of Reverse P...

Typedef Base type Abstract
dpu-reconfiguration-state enumeration Reports the ReConfiguration State for the line. A state change alarm shall be raised indicating a change of the line's Reconfiguration State (see clause A.7.2.1.2).
dpu-reconfiguration-state enumeration Reports the ReConfiguration State for the line. A state change alarm shall be raised indicating a change of the line's Reconfiguration State.
performance-15min-history-interval uint8 Defines the range of 15 minutes intervals and defines the position of the interval relative to the current interval where 1 is the most recent completed interval.
performance-15min-history-interval uint8 Defines the range of 15 minutes intervals and defines the position of the interval relative to the current interval where 1 is the most recent completed interval.
performance-15min-interval uint8 Defines the range of 15 minute intervals.
performance-15min-interval uint8 Defines the range of 15 minute intervals.
performance-24hr-history-interval uint8 Defines the range of 24 hour intervals and defines the position of the interval relative to the current interval where 1 is the most recent completed interval.
performance-24hr-history-interval uint8 Defines the range of 24 hour intervals and defines the position of the interval relative to the current interval where 1 is the most recent completed interval.
performance-24hr-interval uint8 Defines the range of 24 hour intervals.
performance-24hr-interval uint8 Defines the range of 24 hour intervals.
pse-rpf-state enumeration Reports the reverse power feeding state of the Power Source Equipment (PSE).
pse-rpf-state enumeration Reports the reverse power feeding state of the Power Source Equipment (PSE).

© 2023 YumaWorks, Inc. All rights reserved.