submodule bbf-selt-processing-derived-parameter-body {

    yang-version 1.1;

    belongs-to bbf-selt {
        prefix bbf-selt;
    }

    import bbf-yang-types {
      prefix bbf-yang;
    }

    include bbf-selt-pmd-measurement-parameter-body;

    organization
      "Broadband Forum <https://www.broadband-forum.org>
     Common YANG Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
     should be directed to <mailto:help@broadband-forum.org>.

     Editor:      Ken Kerpez, ASSIA, Inc.

     Editor:      Joey Boyd, ADTRAN

     PS Leader:   Sowrirajan Padmanabhan, Nokia

     PS Leader:   Joey Boyd, ADTRAN

     WA Director: Sven Ooghe, Nokia

     WA Director: Joey Boyd, ADTRAN";

    description
      "This submodule contains a collection of YANG definitions for
     Single Ended Line Test Processing (SELT-P) derived parameters.

     Copyright (c) 2016-2020 Broadband Forum

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.

     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.

     3. Neither the name of the copyright holder nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     The above license is used as a license under copyright only.
     Please reference the Forum IPR Policy for patent licensing terms
     <https://www.broadband-forum.org/ipr-policy>.

     Any moral rights which are necessary to exercise under the above
     license grant are also deemed granted under this license.

     This version of this YANG module is part of TR-355a3; see
     the TR itself for full legal notices.";

    revision "2020-10-13" {
      description
        "Amendment 3.
       * Approval Date:    2020-10-13
       * Publication Date: 2020-10-13.";
      reference
        "TR-355a3: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-3.pdf>";

    }

    revision "2019-06-11" {
      description
        "Amendment 2.
       * Approval Date:    2019-06-11
       * Publication Date: 2019-06-11.";
      reference
        "TR-355a2: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Amendment-2.pdf>";

    }

    revision "2018-10-01" {
      description
        "Amendment 1.
       * Approval Date:    2018-10-01
       * Publication Date: 2018-10-01.";
      reference
        "TR-355a1: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Amendment-1.pdf>";

    }

    revision "2017-11-27" {
      description
        "Corrigendum 2 (fixes to the previous revision).
       * Approval Date:    see revision date above.
       * Publication Date: 2018-01-19.";
      reference
        "TR-355c2: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Corrigendum-2.pdf>";

    }

    revision "2017-03-13" {
      description
        "Corrigendum 1 (fixes to the initial revision).
       * Approval Date:    see revision date above.
       * Publication Date: 2017-04-12.";
      reference
        "TR-355c1: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Corrigendum-1.pdf>";

    }

    revision "2016-07-18" {
      description
        "Initial revision.
       * Approval Date:    see revision date above.
       * Publication Date: 2016-08-05.";
      reference
        "TR-355: YANG Modules for FTTdp Management
        	<https://www.broadband-forum.org/technical/download/
        		 TR-355.pdf>";

    }


    feature extended-bandwidth-selt-tflog {
      description
        "Indicates support for extended bandwidth Single Ended Line Test
       (SELT) for reporting the logarithmic power transfer function
       Tflog(f).";
    }

    typedef per-sub-carrier-uint16 {
      type binary {
        length "0..16384";
      }
      description
        "A binary type where each pair of octets represents data
       belonging to a sub-carrier group. The first pair represents
       sub-carrier group 0 and the last represents sub-carrier
       group (length/2 - 1).";
    }

    grouping downstream-upstream-derived-parameters {
      description
        "Derived parameters that are common between the downstream and
       upstream directions.";
      leaf capacity-estimate {
        type bbf-yang:data-rate32;
        description
          "This parameter represents a best-effort estimate of the
         achievable net data rate (in kbit/s) on the loop under test,
         under the following assumptions:

         - Fast mode (i.e., operation with interleaver depth D=1, and
           INP=0 (no impulse noise protection))
         - use of Trellis coding
         - target margin equal to CAP-TARSNRM (see clause B.2.1.4)
         - transmit signal PSD at the U-interface of the
           xTU-transmitter equal to CAP-SIGNALPSD
           (see clause B.2.1.2)
         - noise PSD at the U-interface of the xTU-receiver equal to
           CAP-NOISEPSD (see clause B.2.1.3)
         - support of bit loading from 1 to 15 bits included, in
           steps of 1 bit increments.

         As the capacity is a best-effort estimate, accuracy for this
         parameter is vendor proprietary. The parameter in the
         downstream direction is CAPACITYds, and the parameter in the
         upstream direction is CAPACITYus.";
        reference
          "ITU-T G.996.2 clause B.2.2.7 (CAP-EST)";

      }
    }  // grouping downstream-upstream-derived-parameters

    grouping processing-derived-parameters {
      description
        "Defines the Single Ended Line Test Processing (SELT-P) derived
       parameters.";
      leaf loop-termination-indicator {
        type enumeration {
          enum "open" {
            value 0;
            description "Open.";
          }
          enum "short" {
            value 1;
            description "Short.";
          }
          enum "powered-by-cpe" {
            value 2;
            description
              "Powered on Customer Premises Equipment (CPE).";
          }
          enum "unknown" {
            value 3;
            description
              "Unknown (i.e., failure in identifying the termination).";
          }
        }
        description
          "Loop termination indicator is a three state indication of
         the loop termination defined as follows.

         1) Open
         2) Short
         3) Powered on CPE
         4) Unknown (i.e., failure in identifying the termination).";
        reference
          "ITU-T G.996.2 clause B.2.2.1 (LOOP-TERM)";

      }

      leaf loop-length {
        type uint16 {
          range "0..16383";
        }
        units "1 meter";
        description
          "This parameter is the physical length (in metres) of the
         loop between the U-C and the U-R interface. The loop length
         shall be measured with a granularity of 1 m, with valid
         range of 0 to 16383 m.";
        reference
          "ITU-T G.996.2 clause B.2.2.2 (LOOP-LEN)";

      }

      container loop-topology {
        description
          "The loop topology consists of a description of the loop
         structure, with indication of the physical length of each
         loop segment. In this parameter, a loop segment is defined
         as delimited by either a loop termination, or the presence
         of a bridged tap.

         NOTE 1 - Two cables with different gauges/cable-types
                  connected in series are considered as a single loop
                  segment.

         The loop topology is reported as a list of loop segments,
         using the following conventions:

         1) The first loop segment in the list shall be the segment
            connected to the Single Ended Line Test Physical Medium
            Dependent (SELT-PMD) block measuring the SELT-PMD
            measurement parameters (i.e., the SELT-PMD block shall be
            the starting point of the topology description).
         2) Subsequent loop segments in the list shall describe the
            loop in the direction toward the farend loop termination.
         3) Consecutive loop segments indicated as 'bridged tap'
            represent bridged taps, each branching off from the main
            loop at the same point.

         NOTE 2 - Identification of a bridged tap branching off on a
                  bridged tap is not supported by this parameter.
                  A single loop segment is specified with two
                  sub-parameters: loop segment length (see clause
                  B.1.1.3.1) and loop segment bridged tap indicator
                  (see clause B.1.1.3.2).

         If this parameter is supported, reporting of up to three
         segments is a mandatory capability. Reporting of additional
         segments is optional. ";
        reference
          "ITU-T G.996.2 clause B.2.2.3 (LOOP-TOPOLOGY)";

        list loop {
          key "i";
          description
            "A list of loop segments including the length and whether
           there is a bridged tap.";
          leaf i {
            type uint8;
            description
              "The segment number. The first loop segment in the list
             shall be the segment connected to the Single Ended Line
             Test Physical Medium Dependent (SELT-PMD) block measuring
             the SELT-PMD measurement parameters (i.e., the
             SELT-PMD block shall be the starting point of the
             topology description). Subsequent loop segments in the
             list shall describe the loop in the direction toward the
             farend loop termination.";
          }

          leaf len {
            type uint16 {
              range "0..16383";
            }
            units "1 meter";
            description
              "This parameter specifies the physical length of the loop
             segment, in metres. The loop segment length shall be
             measured with a granularity of 1 m, with a valid range
             of 0 to 16383 m.";
            reference
              "ITU-T G.996.2 clause B.1.1.3.1 (LOOP_SEGM_LENGTH)";

          }

          leaf bti {
            type enumeration {
              enum "in-series" {
                value 0;
                description "In series.";
              }
              enum "bridged-tap" {
                value 1;
                description "Bridged tap.";
              }
            }
            description
              "This parameter specifies whether the loop segment is a
             bridged tap or arranged in series (i.e., not branching,
             not a bridged tap).

             The valid values are:

             1) in series
             2) bridged tap.";
            reference
              "ITU-T G.996.2 clause B.1.1.3.1 (LOOP_SEGM_LENGTH)";

          }
        }  // list loop
      }  // container loop-topology

      container attenuation-characteristics {
        description
          "The line attenuation TFlog(f) is the logarithmic power
         transfer function of the line as a function of frequency
         when both the near-end and far-end line terminations have
         the following values:

         - Source impedance = purely resistive equal to 100 ohms
         - Termination impedance = purely resistive equal to 100 ohms

         The definition for reporting the line attenuation TFlog(f)
         depends on whether or not the option for extended bandwidth
         Single Ended Line Test (SELT) is applied.

         The function TFlog(f) consists of an array of values
         TFlog(i * TFlog_G * Df), with Df = 4.3125 kHz.

         NOTE - In the case where the instantiation of the LT unit is
                the same as the instantiation of the xTU transceiver
                unit, this value may be independent of the subcarrier
                spacing used for the xDSL DMT modulation.

         The range of valid values for the index i is 0 to 8191.

         The attenuation characteristics group size, TFlog_G, has
         three valid values: 1, 2, and 12, indicating whether the
         measurements were performed using a subcarrier spacing of
         4.3125 kHz, 8.625 kHz, or 51.75 kHz respectively.

         The range of valid values for TFlog(i * Df) is from +6.0 dB
         down to -96.2 dB, with a granularity of 0.1 dB (represented
         as values 0 to 1022). A special value, 1023, is used to
         indicate that no measurement could be done for this
         subcarrier because the attenuation is out of the range that
         can be represented.";
        reference
          "ITU-T G.996.2 clause B.2.2.6 (ATT-CHAR)";

        leaf tflog-g {
          type uint8 {
            range "1 | 2 | 12";
          }
          description
            "The attenuation characteristics group size (TFlog_G) is a
           reported parameter identifying the attenuation
           characteristics, TFlog(f), at a frequency spacing equal to
           TFlog_G x Df with Df = 4.3125 kHz. TFlog_G has three valid
           values: 1, 2, and 12.";
        }

        leaf tflog {
          type per-sub-carrier-uint16;
          description
            "An array of values for Tflog(f).";
        }
      }  // container attenuation-characteristics

      leaf missing-micro-filter {
        type boolean;
        description
          "This parameter is a binary indication of a missing or
         incorrectly installed splitter or micro-filter at the U-R
         reference point. A value of 1 for this flag represents a
         missing splitter. This parameter is only defined for the
         SELT-P-R functionality.";
        reference
          "ITU-T G.996.2 clause B.2.2.4 (MIS-FILTER)";

      }

      container downstream {
        description
          "Managed objects applicable in the downstream direction.";
        uses downstream-upstream-derived-parameters;
      }  // container downstream

      container upstream {
        description
          "Managed objects applicable in the upstream direction.";
        uses downstream-upstream-derived-parameters;
      }  // container upstream
    }  // grouping processing-derived-parameters
  }  // submodule bbf-selt-processing-derived-parameter-body