submodule bbf-vdsl-impulse-noise-monitoring-profile-body {

    yang-version 1.1;

    belongs-to bbf-vdsl {
        prefix bbf-vdsl;
    }

    organization
      "Broadband Forum <https://www.broadband-forum.org>
     Common YANG Work Area";

    contact
      "Comments or questions about this Broadband Forum YANG module
     should be directed to <mailto:help@broadband-forum.org>.

     Editor:      Ken Kerpez, ASSIA, Inc.

     Editor:      Joey Boyd, Adtran

     PS Leader:   Joey Boyd, Adtran

     WA Director: Sven Ooghe, Nokia

     WA Director: Joey Boyd, Adtran";

    description
      "This submodule contains a collection of YANG definitions for
     managing common Broadband Forum TR-252i3 clause 5.7 DSL Quality
     Management related profiles; Impulse Noise Monitoring (INM)
     Profile.

     Copyright (c) 2016-2022 Broadband Forum

     Redistribution and use in source and binary forms, with or
     without modification, are permitted provided that the following
     conditions are met:

     1. Redistributions of source code must retain the above copyright
        notice, this list of conditions and the following disclaimer.

     2. Redistributions in binary form must reproduce the above
        copyright notice, this list of conditions and the following
        disclaimer in the documentation and/or other materials
        provided with the distribution.

     3. Neither the name of the copyright holder nor the names of its
        contributors may be used to endorse or promote products
        derived from this software without specific prior written
        permission.

     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
     CONTRIBUTORS \"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES,
     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
     CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
     STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

     The above license is used as a license under copyright only.
     Please reference the Forum IPR Policy for patent licensing terms
     <https://www.broadband-forum.org/ipr-policy>.

     Any moral rights which are necessary to exercise under the above
     license grant are also deemed granted under this license.

     This version of this YANG module is part of TR-355a4; see
     the TR itself for full legal notices.";

    revision "2022-05-23" {
      description
        "Amendment 4.
       * Approval Date:    2022-05-23
       * Publication Date: 2022-05-23.";
      reference
        "TR-355a4: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-4.pdf>";

    }

    revision "2020-10-13" {
      description
        "Amendment 3.
       * Approval Date:    2020-10-13
       * Publication Date: 2020-10-13.";
      reference
        "TR-355a3: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-3.pdf>";

    }

    revision "2019-10-21" {
      description
        "Amendment 2 Corrigendum 1.
       * Approval Date:    2019-10-21
       * Publication Date: 2019-10-21.";
      reference
        "TR-355a2c1: YANG Modules for FTTdp Management
        	    <https://www.broadband-forum.org/download/
        		   TR-355_Amendment-2.pdf>";

    }

    revision "2019-06-11" {
      description
        "Amendment 2.
       * Approval Date:    2019-06-11
       * Publication Date: 2019-06-11.";
      reference
        "TR-355a2: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Amendment-2.pdf>";

    }

    revision "2018-10-01" {
      description
        "Amendment 1.
       * Approval Date:    2018-10-01
       * Publication Date: 2018-10-01.";
      reference
        "TR-355a1: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Amendment-1.pdf>";

    }

    revision "2017-11-27" {
      description
        "Corrigendum 2 (fixes to the previous revision).
       * Approval Date:    see revision date above.
       * Publication Date: 2018-01-19.";
      reference
        "TR-355c2: YANG Modules for FTTdp Management
        	  <https://www.broadband-forum.org/technical/download/
        		 TR-355_Corrigendum-2.pdf>";

    }

    revision "2016-07-18" {
      description
        "Initial revision.
       * Approval Date:    see revision date above.
       * Publication Date: 2016-08-05.";
      reference
        "TR-355: YANG Modules for FTTdp Management
        	<https://www.broadband-forum.org/technical/download/
        		 TR-355.pdf>";

    }


    grouping impulse-noise-monitoring-profile {
      description
        "Impulse Noise Monitoring (INM) is not required for modem
       operation but is a capability for the measurement of Impulse
       Noise. The INM Profile includes the option to control an
       INM function on the receiver of the xDSL Transceiver Unit
       (xTU).";
      leaf inmiato {
        type uint16 {
          range "3..511";
        }
        units "DMT symbols";
        default "3";
        description
          "This is the Inter Arrival Time (IAT) offset that the xDSL
         Transceiver Unit (xTU) receiver will use to determine in
         which bin of the inter arrival time histogram the IAT is
         reported. The valid values for INMIATO ranges from 3 to 511
         Discrete Multi-Tone (DMT) symbols in steps of 1 DMT symbol.";
        reference
          "ITU-T G.997.1 clause 7.3.1.9.1 (INMIATO)";

      }

      leaf inmiats {
        type uint8 {
          range "0..7";
        }
        units "DMT symbols";
        default "0";
        description
          "This is the Inter Arrival Time (IAT) step that the xDSL
         Transceiver Unit (xTU) receiver will use to determine in
         which bin of the inter arrival time histogram the IAT is
         reported. The valid values for INMIATS range from 0 to 7 in
         steps of 1.";
        reference
          "ITU-T G.997.1 clause 7.3.1.9.2 (INMIATS)";

      }

      leaf inmcc {
        type uint8 {
          range "0..64";
        }
        units "DMT symbols";
        default "0";
        description
          "This is the Impulse Noise Monitoring Cluster Continuation
         (INMCC) value that the xDSL Transceiver Unit (xTU) receiver
         will use in the cluster indication process described in the
         relevant ITU-T Recommendation. The valid values for INMCC
         range from 0 to 64 Discrete Multi-Tone (DMT) symbols in steps
         of one DMT symbol.";
        reference
          "ITU-T G.997.1 clause 7.3.1.9.3 (INMCC)";

      }

      leaf inm-inpeq-mode {
        type enumeration {
          enum "0" {
            value 0;
            description
              "INM_INPEQ_MODE = 0.";
          }
          enum "1" {
            value 1;
            description
              "INM_INPEQ_MODE = 1.";
          }
          enum "2" {
            value 2;
            description
              "INM_INPEQ_MODE = 2.";
          }
          enum "3" {
            value 3;
            description
              "INM_INPEQ_MODE = 3.";
          }
          enum "4" {
            value 4;
            description
              "INM_INPEQ_MODE = 4.";
          }
        }
        default "0";
        description
          "This is the Impulse Noise Monitoring (INM) equivalent Impulse
         Noise Protection (INP) mode that the xDSL Transceiver Unit
         (xTU) receiver will use in the computation of the Equivalent
         INP, as defined in the relevant ITU-T Recommendation. The
         valid values for INM_INPEQ_MODE are 0, 1, 2, 3, and 4.
         The default value is enum 0, corresponding to
         INM_INPEQ_MODE = 0.";
        reference
          "ITU-T G.997.1 clause 7.3.1.9.4 (INM_INPEQ_MODE);
          ITU-T G.993.2 clause 11.4.2.2.1";

      }

      leaf inm-inpeq-format {
        type enumeration {
          enum "0" {
            value 0;
            description "Linear scale.";
          }
          enum "1" {
            value 1;
            description "Logarithmic scale.";
          }
        }
        default "0";
        description
          "Defines the way the scale is configured for the INM_INPEQ
         histogram.";
        reference
          "ITU-T G.997.1 clause 7.3.1.9.5;
          ITU-T G.993.2 clause 11.4.2.2.6";

      }

      leaf inm-enable {
        type boolean;
        default "false";
        status deprecated;
        description
          "If true, enables Impulse Noise Monitoring (INM).";
      }
    }  // grouping impulse-noise-monitoring-profile
  }  // submodule bbf-vdsl-impulse-noise-monitoring-profile-body