bbf-vdsl-line-status-body

This submodule contains a collection of YANG definitions for managing Broadband Forum TR-252i3 clause 5.1 xDSL Line. Copyright ...

  • Version: 2020-10-13

    bbf-vdsl-line-status-body@2020-10-13


    
      submodule bbf-vdsl-line-status-body {
    
        yang-version 1.1;
    
        belongs-to bbf-vdsl {
            prefix bbf-vdsl;
        }
    
        include bbf-vdsl-base;
        include bbf-vdsl-base-body;
    
        organization
          "Broadband Forum <https://www.broadband-forum.org>
    Common YANG Work Area";
    
        contact
          "Comments or questions about this Broadband Forum YANG module
    should be directed to <mailto:help@broadband-forum.org>.
    
    Editor:      Ken Kerpez, ASSIA, Inc.
    
    Editor:      Joey Boyd, ADTRAN
    
    PS Leader:   Sowrirajan Padmanabhan, Nokia
    
    PS Leader:   Joey Boyd, ADTRAN
    
    WA Director: Sven Ooghe, Nokia
    
    WA Director: Joey Boyd, ADTRAN";
    
        description
          "This submodule contains a collection of YANG definitions for
    managing Broadband Forum TR-252i3 clause 5.1 xDSL Line.
    
    Copyright (c) 2016-2020 Broadband Forum
    
    Redistribution and use in source and binary forms, with or
    without modification, are permitted provided that the following
    conditions are met:
    
    1. Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.
    
    2. Redistributions in binary form must reproduce the above
       copyright notice, this list of conditions and the following
       disclaimer in the documentation and/or other materials
       provided with the distribution.
    
    3. Neither the name of the copyright holder nor the names of its
       contributors may be used to endorse or promote products
       derived from this software without specific prior written
       permission.
    
    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
    CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
    CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
    ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    
    The above license is used as a license under copyright only.
    Please reference the Forum IPR Policy for patent licensing terms
    <https://www.broadband-forum.org/ipr-policy>.
    
    Any moral rights which are necessary to exercise under the above
    license grant are also deemed granted under this license.
    
    This version of this YANG module is part of TR-355a3; see
    the TR itself for full legal notices.";
    
        revision "2020-10-13" {
          description
            "Amendment 3.
    * Approval Date:    2020-10-13
    * Publication Date: 2020-10-13.";
          reference
            "TR-355a3: YANG Modules for FTTdp Management
            	    <https://www.broadband-forum.org/download/
            		   TR-355_Amendment-3.pdf>";
    
        }
    
        revision "2019-10-21" {
          description
            "Amendment 2 Corrigendum 1.
    * Approval Date:    2019-10-21
    * Publication Date: 2019-10-21.";
          reference
            "TR-355a2c1: YANG Modules for FTTdp Management
            	    <https://www.broadband-forum.org/download/
            		   TR-355_Amendment-2.pdf>";
    
        }
    
        revision "2019-06-11" {
          description
            "Amendment 2.
    * Approval Date:    2019-06-11
    * Publication Date: 2019-06-11.";
          reference
            "TR-355a2: YANG Modules for FTTdp Management
            	  <https://www.broadband-forum.org/technical/download/
            		 TR-355_Amendment-2.pdf>";
    
        }
    
        revision "2018-10-01" {
          description
            "Amendment 1.
    * Approval Date:    2018-10-01
    * Publication Date: 2018-10-01.";
          reference
            "TR-355a1: YANG Modules for FTTdp Management
            	  <https://www.broadband-forum.org/technical/download/
            		 TR-355_Amendment-1.pdf>";
    
        }
    
        revision "2017-03-13" {
          description
            "Corrigendum 1 (fixes to the initial revision).
    * Approval Date:    see revision date above.
    * Publication Date: 2017-04-12.";
          reference
            "TR-355c1: YANG Modules for FTTdp Management
            	  <https://www.broadband-forum.org/technical/download/
            		 TR-355_Corrigendum-1.pdf>";
    
        }
    
        revision "2016-07-18" {
          description
            "Initial revision.
    * Approval Date:    see revision date above.
    * Publication Date: 2016-08-05.";
          reference
            "TR-355: YANG Modules for FTTdp Management
            	<https://www.broadband-forum.org/technical/download/
            		 TR-355.pdf>";
    
        }
    
    
        grouping line-status {
          description
            "The xDSL Line status object represents status/state objects
    for an individual physical transmission line.";
          leaf xdsl-transmission-system {
            type xts-descriptor;
            description
              "This indicates the current xDSL Transmission System.";
            reference
              "ITU-T G.997.1 clause 7.3.1.1.1 xTU transmission system
              enabling (XTSE)";
    
          }
    
          leaf line-power-management-state {
            type enumeration {
              enum "L0" {
                value 0;
                description
                  "Synchronized - This line state (L0) is when
    the line has full transmission (i.e., showtime).";
              }
              enum "L1" {
                value 1;
                description
                  "Power down data transmission - This line state
    (L1) is when there is transmission on the line but the
    net data rate is reduced (e.g., only for OAM and higher
    layer connection and session control). This state
    applies to [ITU-T G.992.2] only.";
              }
              enum "L2" {
                value 2;
                description
                  "Power down data transmission - This line state
    (L2) is when there is transmission on the line but the
    net data rate is reduced (e.g., only for OAM and higher
    layer connection and session control). This state
    applies to [ITU-T G.992.3] and [ITU-T G.992.4] only.";
              }
              enum "L3" {
                value 3;
                description
                  "No-power - This line state (L3) is when there
    is no power transmitted on the line at all.";
              }
            }
            description
              "This parameter identifies the power management state of
    the line.";
            reference
              "ITU-T G.997.1 clause 7.5.1.5 Line power management
              state";
    
          }
    
          leaf initialization-success-failure-cause {
            type enumeration {
              enum "successful" {
                value 0;
                description "Successful.";
              }
              enum "config-error" {
                value 1;
                description
                  "Configuration error. This error occurs with
    inconsistencies in configuration parameters. For
    example, when the line is initialized in an xDSL
    transmission system where an xDSL Transceiver Unit (xTU)
    does not support the configured maximum delay or the
    configured minimum or maximum data rate for one or more
    bearer channels.";
              }
              enum "config-not-feasible" {
                value 2;
                description
                  "Configuration not feasible on the line. This error
    occurs if the minimum data rate cannot be reached on
    the line with the minimum noise margin, maximum Power
    Spectral Density (PSD) level, maximum delay and maximum
    bit error ratio for one or more bearer channels.";
              }
              enum "communication-problem" {
                value 3;
                description
                  "Communication problem. This error occurs, for example,
    due to corrupted messages or bad syntax messages or if
    no common mode can be selected in the G.994.1
    handshaking procedure or due to a timeout.";
              }
              enum "no-far-end-xtu-detected" {
                value 4;
                description
                  "No peer xDSL Transceiver Unit (xTU) detected. This error
    occurs if the peer xTU is not powered or not connected or
    if the line is too long to allow detection of a peer
    xTU.";
              }
              enum "unknown" {
                value 5;
                description
                  "Any other or unknown initialization failure cause.";
              }
              enum "rtx-not-selected" {
                value 6;
                description
                  "ITU T G.998.4 retransmission mode was not selected
    while RTX_MODE = FORCED or with
    RTX_MODE = RTX_TESTMODE.";
              }
            }
            description
              "This parameter indicates whether the last full
    initialization procedure was successful. If the last
    initialization procedure was not successful, this
    parameter provides the reason.";
            reference
              "ITU-T G.997.1 clause 7.5.1.6 Initialization
              success/failure cause";
    
          }
    
          leaf vdsl2-lr-actual-op-type {
            if-feature vdsl2-lr;
            type enumeration {
              enum "disabled" {
                value 0;
                description
                  "Operation according to VDSL2 Long Reach (VDSL2-LR) mode
    is disabled.";
              }
              enum "short" {
                value 1;
                description
                  "Operating according to VDSL2 Long Reach (VDSL2-LR) short
    loop operation type.";
              }
              enum "medium" {
                value 2;
                description
                  "Operation according to VDSL2 Long Reach (VDSL2-LR) medium
    loop operation type.";
              }
              enum "long" {
                value 3;
                description
                  "Operation according to VDSL2 Long Reach (VDSL2-LR) long
    loop operation type.";
              }
            }
            description
              "This parameter reports the actual operation type
    of the VDSL2 Long Reach (VDSL2-LR) mode.";
            reference
              "ITU-T G.997.1 clause 7.5.1.44.1 VDSL2-LR actual
              operation type (VDSL2-LR_ACTOPTYPE)";
    
          }
        }  // grouping line-status
      }  // submodule bbf-vdsl-line-status-body
    

© 2023 YumaWorks, Inc. All rights reserved.