bbf-xpon-defects

This module contains a collection of YANG definitions for supporting the Broadband Forum requirements on management of ITU-T Pas...

  • Version: 2020-10-13

    bbf-xpon-defects@2020-10-13


    
      module bbf-xpon-defects {
    
        yang-version 1.1;
    
        namespace
          "urn:bbf:yang:bbf-xpon-defects";
    
        prefix bbf-xpon-def;
    
        organization
          "Broadband Forum <https://www.broadband-forum.org>
    Fiber Access Networks Work Area";
    
        contact
          "Comments or questions about this Broadband Forum YANG module
    should be directed to <mailto:info@broadband-forum.org>.
    
    Editor:      Joey Boyd, ADTRAN
    
    Editor:      Igor Ternovsky, Broadcom
    
    Editor:      Robert Peschi, Nokia
    
    WA Director: Marta Seda, Calix
    
    WA Director: Samuel Chen, Broadcom";
    
        description
          "This module contains a collection of YANG definitions for
    supporting the Broadband Forum requirements on management of
    ITU-T Passive Optical Network (PON) interfaces as defined in
    ITU-T G.984.x, G.987.x, ITU-T G.989.x and ITU-T G.9807.x. As
    such, this module is specific to access network equipment (e.g.,
    BBF-specified Access Nodes and FTTdp DPUs).
    
    Specifically, this module defines xPON defects.
    
    Copyright (c) 2018-2020, Broadband Forum
    
    Redistribution and use in source and binary forms, with or
    without modification, are permitted provided that the following
    conditions are met:
    
    1. Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.
    
    2. Redistributions in binary form must reproduce the above
       copyright notice, this list of conditions and the following
       disclaimer in the documentation and/or other materials
       provided with the distribution.
    
    3. Neither the name of the copyright holder nor the names of its
       contributors may be used to endorse or promote products
       derived from this software without specific prior written
       permission.
    
    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
    CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
    MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
    CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
    NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
    STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
    ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    
    The above license is used as a license under copyright only.
    Please reference the Forum IPR Policy for patent licensing terms
    <https://www.broadband-forum.org/ipr-policy>.
    
    Any moral rights which are necessary to exercise under the above
    license grant are also deemed granted under this license.
    
    This version of this YANG module is part of TR-385i2; see
    the TR itself for full legal notices.";
    
        revision "2020-10-13" {
          description
            "Issue 2.
    * Approval Date:    2020-10-13.
    * Publication Date: 2020-10-13.";
          reference
            "TR-385i2: ITU-T PON YANG Modules
            	<https://www.broadband-forum.org/technical/download/
            		 TR-385_Issue-2.pdf>";
    
        }
    
    
        identity xpon-defect {
          description
            "Top level identity for xPON defects.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LOSi, LOFi
            ITU-T G.987.3 (01/2014) 14.2.1 LOBi
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 LOBi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2 LOBi";
    
        }
    
        identity items-detected-at-olt-by-onu-serial-number {
          base xpon-defect;
          description
            "Base identity for the defects detected at the Optical Line
    Termination (OLT) for an Optical Network Unit (ONU) whose only
    association is its serial number.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1
            ITU-T G.987.3 (01/2014) 14.2.1
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2";
    
        }
    
        identity sufi {
          base items-detected-at-olt-by-onu-serial-number;
          description
            "SUFi - Start-up failure of ONUi.
    
    The ranging of ONUi has failed. The Optical Line Termination
    (OLT) detects the Optical Network Unit's (ONU) serial number,
    but the ONU fails to complete the bring-up sequence.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 SUFi
            ITU-T G.987.3 (01/2014) 14.2.1 SUFi
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 SUFi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2 SUFi";
    
        }
    
        identity items-detected-at-olt-for-v-ani {
          base xpon-defect;
          description
            "Base identity for the defects detected by Optical Line
    Termination (OLT) for an Optical Network Unit (ONU) associated
    with a virtual Access Network Interface (vANI).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1
            ITU-T G.987.3 (01/2014) 14.2.1
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2";
    
        }
    
        identity lobi {
          base items-detected-at-olt-for-v-ani;
          description
            "LOBi - lost of burst for ONUi.
    
    Failure to delineate, for any reason, the specified number,
    Clobi, of consecutive scheduled bursts from ONUi.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LOSi, LOFi
            ITU-T G.987.3 (01/2014) 14.2.1 LOBi
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 LOBi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2 LOBi";
    
        }
    
        identity tiwi {
          base items-detected-at-olt-for-v-ani;
          description
            "TIWi - Transmission interference warning for ONUi.
    
    The Optical Network Unit (ONU) transmission drift exceeds the
    outer (TIW) threshold, and remains outside the threshold after
    three consecutive attempts to correct it with a Ranging_Time
    Physical Layer Operations, Administrations and Maintenance
    (PLOAM) message.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 TIWi
            ITU-T G.987.3 (01/2014) 14.2.1 TIW
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 TIWi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2 TIW";
    
        }
    
        identity dfi {
          base items-detected-at-olt-for-v-ani;
          description
            "DFi - Disable failure of ONUi.
    
    The Optical Network Unit (ONU) continues to respond to the
    upstream allocations after an attempt to disable the ONU using
    its serial number (with one or more Disable_Serial_Number
    Physical Layer Operations, Administrations and Maintenance
    (PLOAM) messages) which may have been preceded by a failed
    attempt to deactivate the ONU (with one or more Dectivate_ONU
    PLOAM messages).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 DFi
            ITU-T G.987.3 (01/2014) 14.2.1 DFi
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 DFi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2 DFi";
    
        }
    
        identity lopci {
          base items-detected-at-olt-for-v-ani;
          description
            "LOPCi - Loss of Physical Layer Operations, Administrations and
    Maintenance (PLOAM) channel with ONUi.
    
    Generic defect indicating breakage of the PLOAM protocol:
    persistent MIC failure in the upstream; lack of
    acknowledgements or proper PLOAM responses from the Optical
    Network Unit (ONU). Persistent means that the same irregular
    condition is observed consecutively at least three times.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LOAMi
            ITU-T G.987.3 (01/2014) 14.2.1 LOPCi
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Tab 14-2 LOPCi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Tab C.14.2 LOPCi";
    
        }
    
        identity looci {
          base items-detected-at-olt-for-v-ani;
          description
            "LOOCi - loss of OMCC channel with ONUi.
    
    Recognized by the Optical Line Termination's (OLT) Optical
    Network Unit Management and Control Interface (OMCI) processing
    engine (based on the persistent MIC failure in the upstream).";
          reference
            "ITU-T G.987.3 (01/2014) 14.2.1 LOOCi
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Tab 14-2 LOOCi
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Tab C.14.2 LOOCi";
    
        }
    
        identity dowi {
          base items-detected-at-olt-for-v-ani;
          description
            "DOWi - Drift of window of ONUi.
    
    In N sequential bursts from the given Optical Network Unit
    (ONU), the transmission drift exceeds the lower of two
    specified drift thresholds. This condition indicates that while
    the transmission phase has shifted, it remains correctable via
    EqD update.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 DOWi";
    
        }
    
        identity sfi {
          base items-detected-at-olt-for-v-ani;
          description
            "Signal fail of ONUi.
    
    When the upstream Bit Error Rate (BER) of ONUi becomes >=
    10^-Y, this state is entered. Y is configurable.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 SFi";
    
        }
    
        identity sdi {
          base items-detected-at-olt-for-v-ani;
          description
            "SDI - Signal degraded of ONUi.
    
    When the upstream Bit Error Rate (BER) of ONUi becomes
    >= 10^-X, this state is entered. Y is configurable and must be
    higher than Y (the SFi threshold).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 SDi";
    
        }
    
        identity lcdgi {
          base items-detected-at-olt-for-v-ani;
          description
            "LCDGi - Loss of G-PON Encapulation Method (GEM) channel
    delineation.
    
    When GEM fragment delineation of ONUi is lost.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LCDGi";
    
        }
    
        identity rdii {
          base items-detected-at-olt-for-v-ani;
          description
            "RDIi - Remote defect indication of ONUi.
    
    When the RDI field of ONUi is asserted. The Optical Line
    Termination (OLT) transmission is received with defects at the
    ONUi.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 RDIi";
    
        }
    
        identity loai {
          base items-detected-at-olt-for-v-ani;
          description
            "LOAi - Loass of acknowledge with ONUi.
    
    The Optical Line Termination (OLT) does not receive an
    acknowledgement from ONUi after a set of downstream messages
    that imply an upstream acknowledge.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LOAi";
    
        }
    
        identity dgi {
          base items-detected-at-olt-for-v-ani;
          description
            "DGi - Receive dying gasp (DG) of ONUi.
    
    When the Optical Line Termination (OLT) receives DG message
    from ONUi, DGi is asserted.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 DGi";
    
        }
    
        identity memi {
          base items-detected-at-olt-for-v-ani;
          description
            "MEMi - Message_Error message from ONUi.
    
    When the Optical Line Termination (OLT) receives an unknown
    message from ONUi.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 MEMi";
    
        }
    
        identity misi {
          base items-detected-at-olt-for-v-ani;
          description
            "MISi - Link mismatch of ONUi.
    
    The Optical Line Termination (OLT) detects that the received
    PSTi and the transmitted PST are different.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 MISi";
    
        }
    
        identity peei {
          base items-detected-at-olt-for-v-ani;
          description
            "PEEi - Physical equipment error (PEE) of ONUi.
    
    When the Optical Line Termination (OLT) receives a PEE message
    from the Optical Network Unit (ONU).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 PEEi";
    
        }
    
        identity loki {
          base items-detected-at-olt-for-v-ani;
          description
            "LOKi - Loss of key synch with ONUi.
    
    Key transmission from the Optical Network Unit (ONU) in
    response to Request_Key message fails three times.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LOKi";
    
        }
    
        identity items-detected-at-olt-for-ct {
          base xpon-defect;
          description
            "Base identity for the defects detected by Optical Line
    Termination (OLT) for a Channel Termination (CT).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1
            ITU-T G.987.3 (01/2014) 14.2.1
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2";
    
        }
    
        identity los {
          base items-detected-at-olt-for-ct;
          description
            "LOS - Loss of signal.
    
    The Optical Line Termination (OLT) did not receive any expected
    transmissions in the upstream (complete PON failure) for four
    consecutive frames.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 LOS
            ITU-T G.987.3 (01/2014) 14.2.1 LOS
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 LOS
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.2 LOS";
    
        }
    
        identity tf-ct {
          base items-detected-at-olt-for-ct;
          description
            "TF - Transmitter failure.
    
    The Optical Line Termination (OLT) transmitter is declared in
    failure when there is no nominal backfacet photocurrent or when
    the drive currents go beyond the maximum specification.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 TF";
    
        }
    
        identity tia {
          base items-detected-at-olt-for-ct;
          description
            "TIA - Transmission interference alarm.
    
    An Optical Network Unit (ONU) turns on its laser at a time
    assigned to another ONU.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.1 TIA";
    
        }
    
        identity dotxi {
          base items-detected-at-olt-for-ct;
          description
            "DOTXi - drift of transmitter wavelength warning.
    
    The number of transmitter wavelength adjustment requests
    in unit of time and/or estimated amplitude of transmitter
    wavelength adjustment requests exceed the configured
    thresholds. Note that thresholds should take into account
    whether the Optical Network Unit (ONU) is under closed-loop
    wavelength locking control.";
          reference
            "ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 DOTXi";
    
        }
    
        identity alrfi {
          base items-detected-at-olt-for-ct;
          description
            "ALRFi - Attenuation level request failure.
    
    The Optical Line Termination (OLT) Channel Termination (CT)
    detects that no received power level change has occurred in
    response to a Change_Power_Level Physical Layer Operations,
    Administrations and Maintenance (PLOAM) message
    acknowledged by the Optical Network Unit (ONU).";
          reference
            "ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-2 ALRFi";
    
        }
    
        identity items-detected-at-onu {
          base xpon-defect;
          description
            "Base identity for the defects detected by Optical Network Unit
    (ONU).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.2
            ITU-T G.987.3 (01/2014) 14.2.2
            ITU-T G.989.3 (2015)/Amd.2 (11/2018) Table 14-3
            ITU-T G.9807.1 (2016)/Amd.1 (10/2017) Table C.14.3";
    
        }
    
        identity sf {
          base items-detected-at-onu;
          description
            "SF - Signal fail.
    
    When the downstream Bit Error Rate (BER) of ONUi becomes
    >= 10^-Y, this state is entered. Y is configurable.";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.2 SF";
    
        }
    
        identity sd {
          base items-detected-at-onu;
          description
            "SD - Signal degraded.
    
    When the downstream Bit Error Rate (BER) of ONUi becomes
    >= 10^-X, this state is entered. Y is configurable and must be
    higher than Y (the SF threshold).";
          reference
            "ITU-T G.984.3 (01/2014) 11.1.2 SD";
    
        }
      }  // module bbf-xpon-defects
    

© 2023 YumaWorks, Inc. All rights reserved.