aln-parameters |
aln |
Objects related to ALN(f) functionality. |
aln-parameters |
aln |
Data nodes related to ALN(f) functionality. |
aln-parameters |
aln |
Data nodes related to ALN(f) functionality. |
channel-status |
downstream upstream |
Defines the parameters that define the operational status
of a FAST bearer channel. |
channel-status |
downstream upstream |
Defines the parameters that define the operational status
of a FAST bearer channel. |
channel-status |
downstream upstream |
Defines the parameters that define the operational status
of a FAST bearer channel. |
channel-status-parameters |
net-data-rate net-data-rate-in-l2.1 net-data-rate-in-l2.2 expected-throughput expected-throughput-in-l2.1 expected-throughput-in-l2.2 gamma-data-rate attainable-net-data-rate attainable-expected-throughput attainable-gamma-data-rate actual-inp-against-shine actual-inp-against-rein dtu-fec-codeword-length dtu-fec-redundancy fec-codewords-per-dtu |
Bearer channel status parameters applicable to both
upstream and downstream. |
channel-status-parameters |
net-data-rate net-data-rate-in-l2.1 net-data-rate-in-l2.2 expected-throughput expected-throughput-in-l2.1 expected-throughput-in-l2.2 gamma-data-rate attainable-net-data-rate attainable-expected-throughput attainable-gamma-data-rate actual-inp-against-shine actual-inp-against-rein dtu-fec-codeword-length dtu-fec-redundancy fec-codewords-per-dtu |
Bearer channel status parameters applicable to both
upstream and downstream. |
channel-status-parameters |
net-data-rate net-data-rate-in-l2.1 net-data-rate-in-l2.2 expected-throughput expected-throughput-in-l2.1 expected-throughput-in-l2.2 gamma-data-rate attainable-net-data-rate attainable-expected-throughput attainable-gamma-data-rate actual-inp-against-shine actual-inp-against-rein dtu-fec-codeword-length dtu-fec-redundancy fec-codewords-per-dtu |
Bearer channel status parameters applicable to both
upstream and downstream. |
channel-thresholds |
code-violations-threshold uncorrectable-dtus-threshold retransmitted-dtus-threshold |
Performance parameters that have corresponding thresholds
used to issue reports. |
channel-thresholds |
code-violations-threshold uncorrectable-dtus-threshold retransmitted-dtus-threshold |
Performance parameters that have corresponding thresholds
used to issue reports. |
channel-thresholds |
code-violations-threshold uncorrectable-dtus-threshold retransmitted-dtus-threshold |
Performance parameters that have corresponding thresholds
used to issue reports. |
data-rate-parameters |
maximum-net-data-rate minimum-expected-throughput maximum-gamma-data-rate minimum-gamma-data-rate preferred-ndr dynamic-time-assignment low-andeftr-threshold |
Data rate configuration parameters. |
data-rate-parameters |
maximum-net-data-rate minimum-expected-throughput maximum-gamma-data-rate minimum-gamma-data-rate preferred-ndr dynamic-time-assignment low-andeftr-threshold |
Data rate configuration parameters. |
data-rate-parameters |
maximum-net-data-rate minimum-expected-throughput maximum-gamma-data-rate minimum-gamma-data-rate preferred-ndr dynamic-time-assignment low-andeftr-threshold |
Data rate configuration parameters. |
data-rate-profile |
maximum-net-data-rate minimum-expected-throughput maximum-gamma-data-rate minimum-gamma-data-rate preferred-ndr dynamic-time-assignment low-andeftr-threshold |
Defines the parameters contained in a data rate profile. |
data-rate-profile |
maximum-net-data-rate minimum-expected-throughput maximum-gamma-data-rate minimum-gamma-data-rate preferred-ndr dynamic-time-assignment low-andeftr-threshold |
Defines the parameters contained in a data rate profile. |
data-rate-profile |
maximum-net-data-rate minimum-expected-throughput maximum-gamma-data-rate minimum-gamma-data-rate preferred-ndr dynamic-time-assignment low-andeftr-threshold |
Defines the parameters contained in a data rate profile. |
fast-rate-adaptation-parameters |
time-window minimum-degraded-tones uncorrectable-dtu vendor-discretionary-fra-triggering-criteria |
Fast Rate Adaptation (FRA) configuration parameters
applicable to both upstream and downstream. |
fast-rate-adaptation-parameters |
time-window minimum-degraded-tones uncorrectable-dtu vendor-discretionary-fra-triggering-criteria |
Fast Rate Adaptation (FRA) configuration parameters
applicable to both upstream and downstream. |
fast-rate-adaptation-parameters |
time-window minimum-degraded-tones uncorrectable-dtu vendor-discretionary-fra-triggering-criteria |
Fast Rate Adaptation (FRA) configuration parameters
applicable to both upstream and downstream. |
fast-rate-adaptation-profile |
downstream upstream |
Defines the contents of a Fast Rate Adaptation (FRA) Profile. |
fast-rate-adaptation-profile |
downstream upstream |
Defines the contents of a Fast Rate Adaptation (FRA) Profile. |
fast-rate-adaptation-profile |
downstream upstream |
Defines the contents of a Fast Rate Adaptation (FRA) Profile. |
fast-retrain-policy-parameters |
los-defect-persistency lom-defect-persistency lor-defect-persistency reinit-time-threshold low-etr-threshold lor-rmcr-persistency |
reinitialization configuration parameters applicable to both
upstream and downstream. |
fast-retrain-policy-parameters |
los-defect-persistency lom-defect-persistency lor-defect-persistency reinit-time-threshold low-etr-threshold lor-rmcr-persistency |
Reinitialization configuration parameters applicable to both
upstream and downstream. |
fast-retrain-policy-parameters |
los-defect-persistency lom-defect-persistency lor-defect-persistency reinit-time-threshold low-etr-threshold lor-rmcr-persistency |
Reinitialization configuration parameters applicable to both
upstream and downstream. |
fast-retrain-policy-profile |
downstream upstream |
Defines the contents of a Fast Retrain Policy Profile. |
fast-retrain-policy-profile |
downstream upstream |
Defines the contents of a Fast Retrain Policy Profile. |
fast-retrain-policy-profile |
downstream upstream |
Defines the contents of a Fast Retrain Policy Profile. |
ftu-inventory |
ftu-o ftu-r |
Nodes defining the structure and content of FTU inventory. |
ftu-inventory |
ftu-o ftu-r |
Nodes defining the structure and content of FTU inventory. |
ftu-inventory |
ftu-o ftu-r |
Nodes defining the structure and content of FTU inventory. |
ftu-inventory-parameters |
g.994.1-vendor-id version-number self-test-result system-vendor-id system-serial-number profiles-supported annex-x-supported annex-d-supported srec-supported |
Inventory parameters. |
ftu-inventory-parameters |
g.994.1-vendor-id version-number self-test-result system-vendor-id system-serial-number profiles-supported annex-x-supported annex-d-supported srec-supported |
Inventory parameters. |
ftu-inventory-parameters |
g.994.1-vendor-id version-number self-test-result system-vendor-id system-serial-number profiles-supported annex-x-supported annex-d-supported srec-supported |
Inventory parameters. |
ftu-o-inventory-parameters |
vce-id vce-port-index idta-supported |
Inventory parameters applicable only to the FAST Transceiver
Unit - central Office (FTU-O). |
ftu-o-inventory-parameters |
vce-id vce-port-index idta-supported |
Inventory parameters applicable only to the FAST Transceiver
Unit - central Office (FTU-O). |
ftu-o-inventory-parameters |
vce-id vce-port-index idta-supported |
Inventory parameters applicable only to the FAST Transceiver
Unit - central Office (FTU-O). |
impulse-noise-monitoring-parameters |
inmiato inmiats inmcc inm-inpeq-format dtu-cluster-bridging |
Impulse Noise Monitoring (INM) is not required for modem
operation but is a capability for the measurement of Impulse
Noise. The INM Profile includes the option to control an
INM function on the receiver of the FAST Transceiver Unit
(FTU). |
impulse-noise-monitoring-parameters |
inmiato inmiats inmcc inm-inpeq-format dtu-cluster-bridging |
Impulse Noise Monitoring (INM) is not required for modem
operation but is a capability for the measurement of Impulse
Noise. The INM Profile includes the option to control an
INM function on the receiver of the FAST Transceiver Unit
(FTU). |
impulse-noise-monitoring-parameters |
inmiato inmiats inmcc inm-inpeq-format dtu-cluster-bridging |
Impulse Noise Monitoring (INM) is not required for modem
operation but is a capability for the measurement of Impulse
Noise. The INM Profile includes the option to control an
INM function on the receiver of the FAST Transceiver Unit
(FTU). |
impulse-noise-monitoring-profile |
inpeq-scaling-factor iat-scaling-factor inm-enable downstream upstream |
Defines the contents of an Impulse Noise Monitoring (INM)
Profile. |
impulse-noise-monitoring-profile |
inpeq-scaling-factor iat-scaling-factor inm-enable downstream upstream |
Defines the contents of an Impulse Noise Monitoring (INM)
Profile. |
impulse-noise-monitoring-profile |
inpeq-scaling-factor iat-scaling-factor inm-enable downstream upstream |
Defines the contents of an Impulse Noise Monitoring (INM)
Profile. |
line-ftu-failure-parameters |
loss-of-signal loss-of-rmc loss-of-margin loss-of-power |
FAST Transceiver Unit (FTU) failure parameters applicable to
both upstream and downstream. The Loss of Signal (LOS), Loss of
RMC Channel (LOR), and Loss of Margin (LOM) failures are
mutually exclusive and reflect the reason cause of the
triggered re-initialization. If no LOS, LOR, or LOM failure is
declared, then the re-initialization is triggered by a
High_BER event (see clause 12.1.4/G.9701). |
line-ftu-failure-parameters |
loss-of-signal loss-of-rmc loss-of-margin loss-of-power |
FAST Transceiver Unit (FTU) failure parameters applicable to
both upstream and downstream. The Loss of Signal (LOS), Loss of
RMC Channel (LOR), and Loss of Margin (LOM) failures are
mutually exclusive and reflect the reason cause of the
triggered re-initialization. If no LOS, LOR, or LOM failure is
declared, then the re-initialization is triggered by a
High_BER event (see clause 12.1.4/G.9701). |
line-ftu-failure-parameters |
loss-of-signal loss-of-rmc loss-of-margin loss-of-power |
FAST Transceiver Unit (FTU) failure parameters applicable to
both upstream and downstream. The Loss of Signal (LOS), Loss of
RMC Channel (LOR), and Loss of Margin (LOM) failures are
mutually exclusive and reflect the reason cause of the
triggered re-initialization. If no LOS, LOR, or LOM failure is
declared, then the re-initialization is triggered by a
High_BER event (see clause 12.1.4/G.9701). |
line-ftu-update-test |
time-stamp-at-g1-update time-stamp-at-g2-update link-state-at-g1-update |
Update test parameters associated with a Fast Transceiver
Unit. |
line-ftu-update-test |
time-stamp-at-g1-update time-stamp-at-g2-update link-state-at-g1-update |
Update test parameters associated with a Fast Transceiver
Unit. |
line-ftu-update-test |
time-stamp-at-g1-update time-stamp-at-g2-update link-state-at-g1-update |
Update test parameters associated with a Fast Transceiver
Unit. |
line-read-test-parameters |
downstream |
Objects used to configure test parameters on a line
corresponding to how the test parameters are read. |
line-read-test-parameters |
downstream |
Data nodes used to configure test parameters on a line
corresponding to how the test parameters are read. |
line-read-test-parameters |
downstream |
Data nodes used to configure test parameters on a line
corresponding to how the test parameters are read. |
line-spectrum-profile |
profiles link-state-enabling maximum-psd-reduction-in-l2 downstream upstream |
Defines the parameters contained in a line spectrum
profile. |
line-spectrum-profile |
profiles link-state-enabling maximum-psd-reduction-in-l2 downstream upstream |
Defines the parameters contained in a line spectrum
profile. |
line-spectrum-profile |
profiles link-state-enabling maximum-psd-reduction-in-l2 downstream upstream |
Defines the parameters contained in a line spectrum
profile. |
line-status |
profile link-state initialization-success-failure-cause annex-x-enabled annex-d-enabled idta-enabled cdta-procedure-actual-type ftu-o ftu-r downstream upstream |
Defines the parameters that define the operational status of
a FAST line. |
line-status |
profile link-state initialization-success-failure-cause annex-x-enabled annex-d-enabled idta-enabled cdta-procedure-actual-type ftu-o ftu-r downstream upstream |
Defines the parameters that define the operational status of
a FAST line. |
line-status |
profile link-state initialization-success-failure-cause annex-x-enabled annex-d-enabled idta-enabled cdta-procedure-actual-type ftu-o ftu-r downstream upstream |
Defines the parameters that define the operational status of
a FAST line. |
line-status-parameters |
snr-margin snr-margin-in-l2.1 snr-margin-in-l2.2 upbo-electrical-length actual-aggregate-transmit-power actual-tx-psd-ps snr bitsps robust-management-channel signal-attenuation qln hlog |
Line status parameters applicable to both upstream and
downstream. |
line-status-parameters |
snr-margin snr-margin-in-l2.1 snr-margin-in-l2.2 upbo-electrical-length actual-aggregate-transmit-power actual-tx-psd-ps snr bitsps robust-management-channel signal-attenuation qln hlog |
Line status parameters applicable to both upstream and
downstream. |
line-status-parameters |
snr-margin snr-margin-in-l2.1 snr-margin-in-l2.2 upbo-electrical-length actual-aggregate-transmit-power actual-tx-psd-ps snr bitsps robust-management-channel signal-attenuation qln hlog |
Line status parameters applicable to both upstream and
downstream. |
line-test-modes |
rtx-tc-test-mode tps-tc-test-mode dra-test-mode |
Test modes associated with a line. |
line-test-modes |
rtx-tc-test-mode tps-tc-test-mode dra-test-mode |
Test modes associated with a line. |
line-test-modes |
rtx-tc-test-mode tps-tc-test-mode dra-test-mode |
Test modes associated with a line. |
line-thresholds |
errored-seconds-threshold severely-errored-seconds-threshold loss-of-signal-seconds-threshold loss-of-rmc-seconds-threshold unavailable-seconds-threshold full-initializations-threshold failed-initializations-threshold fast-initializations-threshold failed-fast-initializations-threshold spontaneous-interruptions-threshold |
Performance parameters that have corresponding thresholds
used to issue reports. |
line-thresholds |
errored-seconds-threshold severely-errored-seconds-threshold loss-of-signal-seconds-threshold loss-of-rmc-seconds-threshold unavailable-seconds-threshold full-initializations-threshold failed-initializations-threshold fast-initializations-threshold failed-fast-initializations-threshold spontaneous-interruptions-threshold |
Performance parameters that have corresponding thresholds
used to issue reports. |
line-thresholds |
errored-seconds-threshold severely-errored-seconds-threshold loss-of-signal-seconds-threshold loss-of-rmc-seconds-threshold unavailable-seconds-threshold full-initializations-threshold failed-initializations-threshold fast-initializations-threshold failed-fast-initializations-threshold spontaneous-interruptions-threshold |
Performance parameters that have corresponding thresholds
used to issue reports. |
line-time-stamps |
time-stamp-last-successful-bitswap time-stamp-last-successful-autonomous-sra time-stamp-last-successful-fra time-stamp-last-successful-rpa |
Time stamps associated with the upstream or downstream
direction. |
line-time-stamps |
time-stamp-last-successful-bitswap time-stamp-last-successful-autonomous-sra time-stamp-last-successful-fra time-stamp-last-successful-rpa time-stamp-last-successful-rmcr |
Time stamps associated with the upstream or downstream
direction. |
line-time-stamps |
time-stamp-last-successful-bitswap time-stamp-last-successful-autonomous-sra time-stamp-last-successful-fra time-stamp-last-successful-rpa time-stamp-last-successful-rmcr |
Time stamps associated with the upstream or downstream
direction. |
line-update-test-parameters |
ftu-o ftu-r |
Data nodes used to update test parameters on a line. |
line-update-test-parameters |
ftu-o ftu-r |
Data nodes used to update test parameters on a line. |
line-update-test-parameters |
ftu-o ftu-r |
Objects used to update test parameters on a line. |
link-state-test-parameters |
link-state-forced |
A set of parameters used to enable link state tests
specified by ITU-T G.997.2 and G.9701. |
link-state-test-parameters |
link-state-forced |
A set of parameters used to enable link state tests
specified by ITU-T G.997.2 and G.9701. |
link-state-test-parameters |
link-state-forced |
A set of parameters used to enable link state tests
specified by ITU-T G.997.2 and G.9701. |
low-power-data-rate-directional-parameters |
maximum-net-data-rate-in-l2.1 minimum-expected-throughput-in-l2.1 minimum-expected-throughput-after-exit-from-l2.1 |
Parameters associated with configuration of data rates when
operating in a low power mode for both the upstream and
downstream directions. |
low-power-data-rate-directional-parameters |
maximum-net-data-rate-in-l2.1 minimum-expected-throughput-in-l2.1 minimum-expected-throughput-after-exit-from-l2.1 |
Parameters associated with configuration of data rates when
operating in a low power mode for both the upstream and
downstream directions. |
low-power-data-rate-directional-parameters |
maximum-net-data-rate-in-l2.1 minimum-expected-throughput-in-l2.1 minimum-expected-throughput-after-exit-from-l2.1 |
Parameters associated with configuration of data rates when
operating in a low power mode for both the upstream and
downstream directions. |
low-power-data-rate-parameters |
maximum-net-data-rate-in-l2.2 minimum-expected-throughput-in-l2.2 |
Parameters associated with configuration of data rates when
operating in a low power mode. |
low-power-data-rate-parameters |
maximum-net-data-rate-in-l2.2 minimum-expected-throughput-in-l2.2 |
Parameters associated with configuration of data rates when
operating in a low power mode. |
low-power-data-rate-parameters |
maximum-net-data-rate-in-l2.2 minimum-expected-throughput-in-l2.2 |
Parameters associated with configuration of data rates when
operating in a low power mode. |
low-power-data-rate-profile |
maximum-net-data-rate-in-l2.2 minimum-expected-throughput-in-l2.2downstream upstream |
Defines the parameters contained in a low power data rate
profile. |
low-power-data-rate-profile |
maximum-net-data-rate-in-l2.2 minimum-expected-throughput-in-l2.2downstream upstream |
Defines the parameters contained in a low power data rate
profile. |
low-power-data-rate-profile |
maximum-net-data-rate-in-l2.2 minimum-expected-throughput-in-l2.2downstream upstream |
Defines the parameters contained in a low power data rate
profile. |
noise-margin-profile |
downstream upstream |
Defines the contents of a Noise Margin Profile. |
noise-margin-profile |
downstream upstream |
Defines the contents of a Noise Margin Profile. |
noise-margin-profile |
downstream upstream |
Defines the contents of a Noise Margin Profile. |
performance-15min-history-parameters |
number-of-intervals non-valid-intervals |
Defines common parameters required when defining 15 minute
history performance counters. |
performance-15min-history-parameters |
number-of-intervals non-valid-intervals |
Defines common parameters required when defining 15 minute
history performance counters. |
performance-15min-history-parameters |
number-of-intervals non-valid-intervals |
Defines common parameters required when defining 15 minute
history performance counters. |
performance-24hr-history-parameters |
number-of-intervals non-valid-intervals |
Defines common parameters required when defining 24 hour
history performance counters. |
performance-24hr-history-parameters |
number-of-intervals non-valid-intervals |
Defines common parameters required when defining 24 hour
history performance counters. |
performance-24hr-history-parameters |
number-of-intervals non-valid-intervals |
Defines common parameters required when defining 24 hour
history performance counters. |
performance-history-15min-interval-parameters |
measured-timeinvalid-data-flag time-stamp |
Defines common parameters required when defining 15 minute
interval history performance counters. |
performance-history-15min-interval-parameters |
measured-timeinvalid-data-flag time-stamp |
Defines common parameters required when defining 15 minute
interval history performance counters. |
performance-history-15min-interval-parameters |
measured-timeinvalid-data-flag time-stamp |
Defines common parameters required when defining 15 minute
interval history performance counters. |
performance-history-24hr-interval-parameters |
measured-timeinvalid-data-flag time-stamp |
Defines common parameters required when defining 24 hour
interval history performance counters. |
performance-history-24hr-interval-parameters |
measured-timeinvalid-data-flag time-stamp |
Defines common parameters required when defining 24 hour
interval history performance counters. |
performance-history-24hr-interval-parameters |
measured-timeinvalid-data-flag time-stamp |
Defines common parameters required when defining 24 hour
interval history performance counters. |
performance-history-interval-parameters |
invalid-data-flag time-stamp |
Defines common parameters required when defining history
interval performance counters. |
performance-history-interval-parameters |
invalid-data-flag time-stamp |
Defines common parameters required when defining history
interval performance counters. |
performance-history-interval-parameters |
invalid-data-flag time-stamp |
Defines common parameters required when defining history
interval performance counters. |
performance-history-measured-time |
measured-time |
Reports the measured time for a given interval. |
performance-history-measured-time |
measured-time |
Reports the measured time for a given interval. |
performance-history-measured-time |
measured-time |
Reports the measured time for a given interval. |
power-and-spectrum-usage-parameters |
maximum-aggregate-transmit-power carmask rmccarmask |
Power and spectrum usage configuration parameters. |
power-and-spectrum-usage-parameters |
maximum-aggregate-transmit-power carmask rmccarmask |
Power and spectrum usage configuration parameters. |
power-and-spectrum-usage-parameters |
maximum-aggregate-transmit-power carmask rmccarmask |
Power and spectrum usage configuration parameters. |
retransmission-parameters |
maximum-delay minimum-inp-against-shine shine-ratio minimum-inp-against-rein rein-inter-arrival-time minimum-rfec-nfec-ratio |
Retransmission configuration parameters applicable to both
upstream and downstream. |
retransmission-parameters |
maximum-delay minimum-inp-against-shine shine-ratio minimum-inp-against-rein rein-inter-arrival-time minimum-rfec-nfec-ratio |
Retransmission configuration parameters applicable to both
upstream and downstream. |
retransmission-parameters |
maximum-delay minimum-inp-against-shine shine-ratio minimum-inp-against-rein rein-inter-arrival-time minimum-rfec-nfec-ratio |
Retransmission configuration parameters applicable to both
upstream and downstream. |
retransmission-profile |
downstream upstream |
Defines the contents of a Retransmission Profile. |
retransmission-profile |
downstream upstream |
Defines the contents of a Retransmission Profile. |
retransmission-profile |
downstream upstream |
Defines the contents of a Retransmission Profile. |
robust-management-channel-parameters |
target-noise-margin minimum-noise-margin maximum-bit-loading |
Robust Management Channel (RMC) configuration parameters
applicable to both upstream and downstream. |
robust-management-channel-parameters |
target-noise-margin minimum-noise-margin maximum-bit-loading |
Robust Management Channel (RMC) configuration parameters
applicable to both upstream and downstream. |
robust-management-channel-parameters |
target-noise-margin minimum-noise-margin maximum-bit-loading |
Robust Management Channel (RMC) configuration parameters
applicable to both upstream and downstream. |
seamless-rate-adaptation-parameters |
upshift-noise-margin upshift-noise-margin-in-l2.1 minimum-time-interval-upshift-sra downshift-noise-margin-in-l2.1 minimum-time-interval-downshift-sra |
Seamless Rate Adaptation (SRA) configuration parameters
applicable to both upstream and downstream. |
seamless-rate-adaptation-parameters |
upshift-noise-margin upshift-noise-margin-in-l2.1 minimum-time-interval-upshift-sra downshift-noise-margin-in-l2.1 minimum-time-interval-downshift-sra |
Seamless Rate Adaptation (SRA) configuration parameters
applicable to both upstream and downstream. |
seamless-rate-adaptation-parameters |
upshift-noise-margin upshift-noise-margin-in-l2.1 minimum-time-interval-upshift-sra downshift-noise-margin-in-l2.1 minimum-time-interval-downshift-sra |
Seamless Rate Adaptation (SRA) configuration parameters
applicable to both upstream and downstream. |
sub-carrier-range |
start-index stop-index |
Defines a sub-carrier band, i.e., a set of contiguous
sub-carriers. |
sub-carrier-range |
start-index stop-index |
Defines a sub-carrier band, i.e., a set of contiguous
sub-carriers. |
sub-carrier-range |
start-index stop-index |
Defines a sub-carrier band, i.e., a set of contiguous
sub-carriers. |
tdd-profile |
total-symbol-periods downstream-symbol-periods cyclic-extension dynamic-time-assignment |
Defines the contents of a Time Division Duplexing (TDD)
Profile. |
tdd-profile |
total-symbol-periods downstream-symbol-periods cyclic-extension dynamic-time-assignment |
Defines the contents of a Time Division Duplexing (TDD)
Profile. |
tdd-profile |
total-symbol-periods downstream-symbol-periods cyclic-extension dynamic-time-assignment |
Defines the contents of a Time Division Duplexing (TDD)
Profile. |
test-mode-enable-parameters |
rtx-tc-test-mode tps-tc-test-mode dra-test-mode |
A set of parameters used to enable various test modes
specified by ITU-T G.997.2 and G.9701. |
test-mode-enable-parameters |
rtx-tc-test-mode tps-tc-test-mode dra-test-mode |
A set of parameters used to enable various test modes
specified by ITU-T G.997.2 and G.9701. |
test-mode-enable-parameters |
rtx-tc-test-mode tps-tc-test-mode dra-test-mode |
A set of parameters used to enable various test modes
specified by ITU-T G.997.2 and G.9701. |
time-division-duplexing-parameters |
total-symbol-periods downstream-symbol-periods cyclic-extension dynamic-time-assignment |
Time Division Duplexing (TDD) configuration parameters. |
time-division-duplexing-parameters |
total-symbol-periods downstream-symbol-periods cyclic-extension dynamic-time-assignment |
Time Division Duplexing (TDD) configuration parameters. |
time-division-duplexing-parameters |
total-symbol-periods downstream-symbol-periods cyclic-extension dynamic-time-assignment |
Time Division Duplexing (TDD) configuration parameters. |
upstream-power-back-off-parameters |
upbopsd-a upbopsd-b upbo-upstream-electrical-length upbo-force-electrical-length upbo-reference-electrical-length |
Power-back-off-specific configuration parameters. |
upstream-power-back-off-parameters |
upbopsd-a upbopsd-b upbo-upstream-electrical-length upbo-force-electrical-length upbo-reference-electrical-length |
Power-back-off-specific configuration parameters. |
upstream-power-back-off-parameters |
upbopsd-a upbopsd-b upbo-upstream-electrical-length upbo-force-electrical-length upbo-reference-electrical-length |
Power-back-off-specific configuration parameters. |
upstream-power-back-off-profile |
upbopsd-a upbopsd-b upbo-upstream-electrical-length upbo-force-electrical-length upbo-reference-electrical-length |
Defines the parameters contained in an upstream power back-off
profile. |
upstream-power-back-off-profile |
upbopsd-a upbopsd-b upbo-upstream-electrical-length upbo-force-electrical-length upbo-reference-electrical-length |
Defines the parameters contained in an upstream power back-off
profile. |
upstream-power-back-off-profile |
upbopsd-a upbopsd-b upbo-upstream-electrical-length upbo-force-electrical-length upbo-reference-electrical-length |
Defines the parameters contained in an upstream power back-off
profile. |
vectoring-downstream-parameters |
xlog-group-size-req |
Vectoring configuration parameters applicable in the
downstream direction. |
vectoring-downstream-parameters |
xlog-group-size-req |
Vectoring configuration parameters applicable in the
downstream direction. |
vectoring-downstream-parameters |
xlog-group-size-req |
Vectoring configuration parameters applicable in the
downstream direction. |
vectoring-parameters |
fext-to-cancel-enable tgvn-allowed |
Vectoring configuration parameters applicable to both
upstream and downstream. |
vectoring-parameters |
fext-to-cancel-enable tgvn-allowed |
Vectoring configuration parameters applicable to both
upstream and downstream. |
vectoring-parameters |
fext-to-cancel-enable tgvn-allowed |
Vectoring configuration parameters applicable to both
upstream and downstream. |
vectoring-profile |
downstream upstream annex-x-mode annex-d-mode |
Defines the contents of a Vectoring Profile. |
vectoring-profile |
downstream upstream annex-x-mode annex-d-mode |
Defines the contents of a Vectoring Profile. |
vectoring-profile |
downstream upstream annex-x-mode annex-d-mode |
Defines the contents of a Vectoring Profile. |
xlog-parameters |
xlog |
Data nodes related to XLOG functionality. |
xlog-parameters |
xlog |
Objects related to XLOG functionality. |
xlog-parameters |
xlog |
Data nodes related to XLOG functionality. |